200636392 Hydraulic cylinder gasket for XCMG RP705 paver spare parts

Short Description:

803003944, Track Tension Cylinder, genuine XCMG track tension cylinder assembly for XCMG RP705 medium crawler asphalt paver.

Product Detail

Product Tags

description

This genuine cylinder shim is stamped and precision machined from high‑strength wear‑resistant plate. It features flat, smooth surface and consistent thickness to resist compression deformation. Passivated anti‑rust finish protects the shim from hydraulic oil, mud and asphalt dust. Manufactured to tight tolerance per XCMG drawing. Combined stacking allows fine adjustment of assembly clearance, keeps coaxiality of piston and guide sleeve, and reduces internal leakage and eccentric wear. It shall be renewed when disassembling cylinder, replacing seals or piston rod, to replace deformed, corroded or crushed old shims, maintain assembly accuracy and extend seal service life.

product parameters

Part Number: 200636392
Name: Cylinder Shim
Type: Hydraulic cylinder adjustment shim
Material: High‑strength wear‑resistant cold‑rolled steel plate
Process: Stamping & precision machining, anti‑rust passivation
Function: Clearance adjustment, load distribution, positioning aid
Applicable Machine: XCMG RP705 medium crawler asphalt paver and XCMG hydraulic cylinders with matched mounting dimension

Applicable Scenarios

It is used during assembly and service of hopper cylinder, lifting cylinder, scraper cylinder and track tension cylinder on RP705 paver. When overhauling cylinders, replacing oil seals or repairing scored piston rods, it adjusts clearance and eliminates axial play.

advantage

• Precision OEM machining with flat surface and tight thickness tolerance for accurate adjustment
• High‑strength plate resists distortion under load and maintains stable clearance under continuous vibration
• Anti‑rust passivated surface tolerates long‑term hydraulic oil immersion and prevents rust debris from damaging seals
• Standard profile for easy fitting; single or stacked shims enable fine clearance tuning
• Recommended replacement together with seals during cylinder service to greatly cut internal leakage risk
• Matches cylinder mounting positions on RP705 without on‑site grinding to save repair time

FAQ

Q: Does this cylinder shim fit XCMG RP705 paver?
A: Yes. Part No. 200636392 is original XCMG cylinder adjustment shim for designated hydraulic cylinder assembly positions on RP705 medium crawler asphalt paver.

Q: What is the function of the cylinder shim? Can I omit it?
A: It adjusts axial clearance and spreads clamping load. Omission or deformed shims lead to eccentric piston wear, rapid seal failure and internal leakage. It must be installed as required.

Q: Must the shim be replaced during cylinder repair?
A: Replace it if crushed, corroded or warped. Flat intact shims may be reused occasionally, yet new shims are preferred for full overhaul.

Q: Can ordinary sheet metal replace this genuine shim?
A: Not recommended. Ordinary sheet has uneven thickness and tends to rust and deform, leading to poor clearance control and premature cylinder leakage.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us