200635170 Right Hydraulic Pipe II for XCMG RP705 paver spare parts

Short Description:

Right Hydraulic Pipe Ⅰ, Part No.200635178, is a special hydraulic pipeline for the right travel system of the paver. It delivers pressurized hydraulic oil to transmit power for travel and tensioning functions.

Product Detail

Product Tags

description

This high-pressure hose assembly is equipped with hydraulic connectors at both ends. It connects hydraulic valves, travel motor and tension cylinder on the right undercarriage, conveying high-pressure hydraulic oil. Together with Right Hydraulic Pipe Ⅰ, it forms the complete right-side travel hydraulic circuit. Under continuous vibration, high asphalt temperature and gravel scouring, the outer rubber cover is prone to wear, aging and cracking, resulting in oil leakage, bulging or burst. Damaged hose causes oil loss and insufficient pressure, leading to weak track drive and failed tension adjustment. It is an important vulnerable part of the travel hydraulic system.

product parameters

Part No.:200635170
Product Name:Right Hydraulic Pipe Ⅱ
Structure:High-pressure hose body + hydraulic connectors at both ends
Outer Material:Wear-resistant and anti-aging rubber cover
Working Medium:Anti-wear hydraulic oil
Fluid Temperature:-20℃~+80℃
Function:Deliver high-pressure hydraulic oil, connect the right-side hydraulic circuit, cooperate with Right Hydraulic Pipe Ⅰ to supply hydraulic power for travel motor and tension cylinder, ensure stable track driving and tension adjustment

Applicable Scenarios

Installed on the right undercarriage of XCMG RP705 paver, connected to the travel hydraulic circuit and used together with Right Hydraulic Pipe Ⅰ to transfer hydraulic oil between the right travel motor and tension cylinder.

advantage

▪ Original designed hose with accurate length and connector angle, ready for direct installation
▪ High-pressure and oil resistant, withstand pressure pulses of the hydraulic system
▪ Wear-resistant outer rubber cover, resist gravel friction and high-temperature asphalt corrosion
▪ Proper bending angle matching chassis layout, not easy to break under vibration
▪ Quickly fix oil leakage and restore hydraulic system pressure after replacement

FAQ

Q:Can Right Hydraulic Pipe Ⅰ and Right Hydraulic Pipe Ⅱ replace each other?
A:No. They differ in routing, length and connector angle. Install according to part number.

Q:Can the hose with surface bulging keep working?
A:No. Bulging means internal steel wire layer is damaged and may burst under high pressure, replace immediately.

Q:Is it OK to only replace the O-ring if oil leaks at the connector?
A:Yes if the thread and connector are intact. Replace the whole hose if connector is deformed or thread damaged.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us