200635921 rear floor plate for XCMG RP705 paver spare parts

200635921 rear floor plate for XCMG RP705 paver spare parts Featured Image
  • 200635921 rear floor plate for XCMG RP705 paver spare parts

Short Description:

200635914, Chain Assembly, suitable for XCMG RP705 medium crawler paver. It is a complete set of special scraper conveyor chain for the feeding system and the core power transmission component of the feeding system.

Product Detail

Product Tags

description

This paver rear bottom plate is made of high wear-resistant alloy steel plate by CNC machining. Its guiding curved surface and mounting holes are cut and drilled strictly according to original drawings. After wear-strengthening heat treatment and anti-corrosion spraying, it features outstanding wear and impact resistance. As a transition liner, it collects mixture from the hopper and guides it smoothly to the scraper chain, reducing material stagnation, arching and segregation. When transporting asphalt with coarse aggregate over long periods, the plate wears gradually. If deep grooves, perforation or tearing appear, this part can be replaced separately instead of cutting and repairing the whole hopper, greatly cutting overhaul expenses. As an original replacement spare part, it is widely used for hopper renovation, regular liner renewal and new machine assembly.

product parameters

- Part No.: 200635921
- Name: Rear Bottom Plate
- Applicable Model: XCMG RP705 medium crawler paver
- Material: High wear-resistant alloy steel plate
- Process: CNC cutting, drilling, wear strengthening, anti-corrosion spraying
- Function: Material guiding, wear protection, protection of rear hopper base

Applicable Scenarios

Transition guiding at the rear of paver hopper; transferring material into the scraper feeding passage; replacement of worn, perforated or torn old rear bottom plates.

advantage

- Original profile with accurate outline and hole layout for easy alignment without on-site trimming
- Wear-resistant substrate resists continuous scouring by coarse aggregate and outlasts ordinary steel plates
- Optimized guiding shape reduces material accumulation and arching, mitigates segregation for even feeding
- Independent liner design allows separate replacement upon local damage to cut overall maintenance cost
- Matches the front bottom plate of the same machine with unified specifications for convenient set stocking

FAQ

Q: Can the rear bottom plate keep working if local grooves appear?
A: It can remain in service with more frequent inspections if enough wall thickness remains without penetration or cracks. Once worn through, aggregate will erode the hopper base metal, so immediate replacement is required.

Q: Is it necessary to replace the front bottom plate together?
A: Set replacement is recommended if the front plate is heavily worn to guarantee smooth material flow. If the front plate stays intact, only the rear plate can be renewed.

Q: What are the key points for installing the rear bottom plate?
A: Clean the hopper mating surface and keep it flat. Tighten bolts diagonally and evenly to avoid vibration-induced accelerated wear. Check interference with the scraper chain after installation.

Q: What causes fast wear of the rear bottom plate?
A: High proportion of coarse aggregate, persistently low material level and concentrated impact will speed up wear. Adjust feeding rhythm and flip the liner if the structure permits to distribute wear evenly.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories