200635181 Spacer for XCMG RP705 paver spare parts

Short Description:

805006294, Bolt M20×70, genuine high‑strength coarse‑thread hex bolt for XCMG RP705 medium crawler asphalt paver. It is a heavy‑duty standard fastener widely adopted on track supports, bearing beams and thick bracket joints.

Product Detail

Product Tags

description

This spacer sleeve is precision turned from high‑quality alloy steel tube with excellent concentricity and flat end faces. The working surface is hardened for superior wear resistance against abrasive aggregate and cyclic impact. Anti‑rust treatment protects it from hot asphalt, mud and moisture. It limits axial float and prevents direct friction between bearing, roller and bracket. It replaces worn, scratched or seized old spacers and can be bundled with complete track running gear kits.

product parameters

Part Number: 200635181
Name: Spacer Sleeve
Type: Positioning spacer for paver track running assembly
Material: Alloy steel tube
Process: Precision turning, facing, surface hardening, anti‑rust treatment
Mounting: Fitted onto pin shaft between roller and bracket
Matching Parts: Pin shaft, bearing, retaining ring, idler / support roller assembly
Key Features: High concentricity, flat end face, wear and impact resistance, accurate gap control, mud and corrosion resistance
Applicable Machine: XCMG RP705 medium crawler asphalt paver and compatible XCMG crawler pavers with identical undercarriage structure

Applicable Scenarios

It is fitted on the pin shaft of idler and support roller on RP705 paver to set axial clearance. It is replaced when worn, deformed or seized and stocked for full track undercarriage overhaul.

advantage

• OEM dimensions guarantee precise clearance control for track rollers
• Hardened running surface delivers outstanding abrasion resistance
• Precision bore and outer circle prevent pin seizure and stiff rotation
• Flat bearing ends distribute load evenly to avoid local collapse
• Individually replaceable without swapping the whole roller assembly
• Matches idlers, support rollers and pins for convenient kitting

FAQ

Q: When should the spacer be replaced?
A: Replace if end faces are heavily worn, bore is scored, out of round or cracked, causing excessive roller end play.

Q: Can a slightly worn spacer remain in use?
A: Minor wear within factory clearance limit may be acceptable temporarily; replacement is recommended during overhaul.

Q: Can a cut steel tube substitute it?
A: Not recommended. Homemade tubes lack hardening and precision, leading to premature undercarriage failure.

Q: Is a spacer the same as a bushing?
A: No. A spacer controls axial spacing; a bushing serves as a radial sliding bearing, they are not interchangeable.

Q: Is further shimming required after fitting this spacer?
A: This is a fixed‑length spacer. If clearance remains excessive, inspect the roller and bracket for wear.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us