200635889 left flip plate welding for XCMG RP705 paver spare parts

product parameters

- Part Number: 200635889
- Name: Left Flip Plate Weldment
- Applicable Model: RP705 medium crawler paver
- Material: High wear-resistant structural steel with reinforcing ribs
- Process: Integral welding, stress relief, sandblasting, anti-corrosion coating
- Matching Parts: Hinge pin, elastic retaining ring, hydraulic cylinder
- Function: Control feeding on hopper left side, block mixture and prevent side spillage

Applicable Scenarios

It is mounted on the left side of RP705 paver hopper for asphalt paving of municipal roads, highways, factory pavements and airport projects.

- Integrated reinforcing ribs for high rigidity and impact resistance
- Stress relief treatment reduces weld fatigue and cracking risk
- Precisely aligned hinge lugs for quiet and smooth flipping
- Optimized inner surface to cut down asphalt buildup and cleaning work
- Original assembly dimensions, direct replacement without re-welding
- Thick protective coating against asphalt, muddy water and grit

FAQ

Q: Can a cracked left flip plate weldment be repaired?
A: Minor cracks can be ground and re-welded. If ribs break or the main plate tears heavily, full replacement is recommended for safety.

Q: Should the left hydraulic cylinder be replaced together with the flip plate?
A: If the cylinder holds pressure and the rod is intact, only the weldment needs replacement. Inspect the lug if it is heavily worn.

Q: What causes slow and weak movement of the left flip plate?
A: Check hydraulic pressure and cylinder seals first. Then clear jammed material and lubricate hinge pins. Check whether deformed plate causes interference.

Q: What if the new left flip plate moves out of sync with the right one?
A: Adjust the throttle valves of hydraulic lines to synchronize both cylinders. Remove debris from hinge points to equalize travel.