200635914 chain assembly for XCMG RP705 paver spare parts

200635914 chain assembly for XCMG RP705 paver spare parts Featured Image
  • 200635914 chain assembly for XCMG RP705 paver spare parts

Short Description:

200635913, Front Bottom Plate, suitable for XCMG RP705 medium crawler paver. It is a bearing liner at the front of the hopper, in direct contact with asphalt mixture.

Product Detail

Product Tags

description

This chain assembly is an original pre-assembled set, including link plates, pins, sleeves, rollers, matched scrapers and connecting links. All parts are made of high-strength wear-resistant alloy steel, forged, precision machined and carburized for quenching and strengthening. The links feature uniform hardness with excellent tensile, impact and wear resistance. When the paver transports high-temperature asphalt and aggregate for long hours, the chain bears cyclic tension and friction continuously. The precise clearance between sleeves and pins enables smooth operation and low jamming risk. Supplied as a complete unit with pitch and link count strictly matched for RP705 feeding transmission, it directly replaces aged chains with elongation, wear, fracture or seized joints and greatly cuts on-site fitting time. It is a key wearing assembly for paver overhaul and feeding system maintenance.

product parameters

- Part No.: 200635914
- Name: Chain Assembly
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Wear-resistant alloy steel
- Components: Link plates, pins, sleeves, rollers, scrapers, connecting links
- Process: Forging, carburizing quenching, precision assembly, anti-rust treatment
- Function: Power transmission for feeding scraper conveyor

Applicable Scenarios

Material conveying for left and right paver feeding mechanisms; full replacement when old chain stretches, breaks or scrapers fall off; overhaul and renovation of feeding transmission system.

advantage

- Original complete assembly with accurate pitch and link count, smooth meshing with sprockets and low risk of jumping teeth
- Carburized and quenched links with hard wear-resistant surface and tough core, impact resistant and not prone to brittle fracture
- Pre-fitted with scrapers, no separate selection required, ready for installation upon arrival
- Precision fit between pins and sleeves for good lubrication retention, low elongation rate and longer service life
- Designed exclusively for RP705 feeding system, easy stocking for left and right sides and convenient batch replacement

FAQ

Q: Can a slightly elongated chain be shortened for reuse?
A: Shortening is not recommended. Uniform elongation indicates worn pins and sleeves. Shortening will misalign meshing positions, accelerate sprocket wear and may cause sudden chain breakage and shutdown.

Q: Should sprockets and driven wheels be replaced together with the new chain?
A: Synchronous replacement is recommended if sprocket teeth are heavily worn and sharpened. If sprockets remain in good condition, only the chain can be replaced, with more frequent inspections afterwards.

Q: How to lubricate the chain during routine maintenance?
A: Fill high-temperature grease on schedule and clear asphalt stuck between links to avoid abrasive damage from hard particles. Increase lubrication frequency under high-temperature working conditions.

Q: Are the left and right feeding chains interchangeable?
A: Interchange is allowed with identical part numbers. Check scraper orientation during installation; reversed scrapers cannot carry material normally.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories