801501811 handlebar m12×60 for XCMG RP705 paver spare parts

801501811 handlebar m12×60 for XCMG RP705 paver spare parts Featured Image
  • 801501811 handlebar m12×60 for XCMG RP705 paver spare parts

Short Description:

Handle Grip M12×60, Part No.: 801501811, fits RP705 medium crawler paver. It is a protective grip for the control lever.

Product Detail

Product Tags

description

This handle grip is integrally molded from oil-resistant and wear-resistant rubber with embedded threaded insert. The internal thread is M12 and matches 60 mm stud. The textured outer surface prevents slipping. The rubber body absorbs vibration transmitted from the machine to reduce operator fatigue. The compound resists aging, asphalt and oil contamination and remains stable under wide temperature variation. It screws directly onto the control lever for quick installation and prevents injury from exposed metal ends.

product parameters

- Part Number: 801501811
- Name: Handle Grip M12×60
- Applicable Model: RP705 medium crawler paver
- Thread: M12, suitable for 60 mm stud
- Material: Oil-resistant synthetic rubber with metal insert
- Process: Integral compression molding, insert embedding, trimming
- Matching Parts: Control lever stud
- Function: Anti-slip handling, vibration and heat insulation, safety protection

Applicable Scenarios

Equipped at the ends of various manual control levers on the RP705 paver, it is widely used for asphalt paving operations on municipal roads, highways, industrial parks, and airport runways.

advantage

- Embedded metal threaded bushing prevents thread stripping and ensures a secure tightening.
- The non-slip textured surface makes it easy to slip off even when your hands are oily.
- Rubber cushioning structure effectively dampens vibrations and reduces hand strain.
- Resistant to oil and aging, resists asphalt and diesel corrosion, and has a longer service life.
- Suitable for high and low temperature conditions; does not harden easily when exposed to sunlight; does not crack easily when at low temperatures.
- Original factory standard specifications, direct screw-on installation, quick replacement

FAQ

Q: Can a cracked handle grip keep being used?
A: Fine surface cracks may be monitored. Replace it once deep cracks expose the metal insert.

Q: Why does the grip become loose easily?
A: It is usually caused by worn threads or stripped insert. Replace the whole grip if the insert slips.

Q: Can ordinary rubber tubing substitute this grip?
A: Not recommended. Ordinary rubber lacks reinforced insert and poor oil and heat resistance.

Q: What causes swollen and sticky grip?
A: It is rubber aging induced by oil and heat. Replace it for safe operation.

Q: Is thread locker required during installation?
A: Tighten firmly by default. A small amount of thread locker can be applied for heavy vibration.

Q: What problems arise without the handle grip?
A: Slippery hot metal lever, strong vibration, scratch hazard and poor control stability.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories