200635916 post-protection for XCMG RP705 paver spare parts

200635916 post-protection for XCMG RP705 paver spare parts Featured Image
  • 200635916 post-protection for XCMG RP705 paver spare parts

Short Description:

200638880, Left Rear Guard, suitable for XCMG RP705 medium crawler paver. It is a dedicated protective plate installed on the left rear side of the feeding assembly.

Product Detail

Product Tags

description

This genuine rear middle guard is cut and bent from carbon steel plate with standard mounting holes and a profile matching the central frame. It is derusted and coated with anti‑corrosion paint for reliable impact resistance. During continuous paving, aggregate thrown by both chains converges toward the center. This guard acts as a barrier, protecting central fittings and hoses, reducing asphalt buildup and grit ingress into seals. If the plate is torn, heavily deformed, has elongated holes or widespread rust, unprotected hydraulic parts and pins are prone to wear, leakage and noisy grit contamination. Replace it if badly damaged during overhaul.

product parameters

- Part No.: 200635916
- Name: Rear Middle Guard
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Carbon structural steel plate
- Process: CNC cutting, bending, drilling, deburring, derusting, anti‑corrosion painting
- Matching parts: Fixing bolts, flat washers
- Function: Protect pipelines, fittings and connectors at the rear center of the feeding assembly, block aggregate impact, isolate moving chains and reduce material buildup

Applicable Scenarios

Central rear protection for paver feeding assembly; replacement for deformed, torn or rusted old guards; shielding for pipelines between left and right drives; renewal during feeding tail maintenance; pre‑assembly for new feeding assemblies.

advantage

- Original formed profile matches the machine contour with accurate holes for easy fitting
- Sturdy steel plate catches flying aggregate from both sides and protects central costly hydraulic parts
- Anti‑corrosion coating resists hot asphalt and muddy water to slow rusting
- Well‑designed clearance avoids rubbing against chains and hoses and reduces material jamming
- Separate individual guard for independent replacement and lower maintenance cost

FAQ

Q: Can a slightly dented guard be straightened and reused?
A: It can be reused after cleaning and straightening if there are no cracks or stretched mounting holes. If it is torn or has cracked welds, replacement is recommended.

Q: Can the rear middle guard be interchanged with left or right rear guards?
A: No. The rear middle guard has a dedicated central profile with different dimensions and shape and is not interchangeable.

Q: How to remove caked asphalt on the guard?
A: Scrape asphalt gently with soft tools after the machine fully cools down. Avoid heavy hammering to prevent plate deformation and paint peeling.

Q: Does it require a specific installation direction?
A: Yes. The folded flange faces flying material. Manually rotate both chains after installation to check for rubbing.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories