200637070 pressing plate for XCMG RP705 paver spare parts

200637070 pressing plate for XCMG RP705 paver spare parts Featured Image
  • 200637070 pressing plate for XCMG RP705 paver spare parts

Short Description:

Press Plate, Part No.: 200637070, fits RP705 medium crawler paver. It is a dedicated clamping steel plate for rubber baffles.

Product Detail

Product Tags

description

This press plate is laser cut from high-strength carbon steel with flat surface and good resistance to distortion. Pre-drilled mounting holes perfectly align with matching rubber baffles. Rounded edges prevent sharp corners from cutting rubber. Sandblasted and coated with anti-corrosion paint, it withstands hot asphalt, abrasive aggregate, muddy water and diesel contamination. When tightened, it delivers even clamping force without localized pressure that tears rubber. Under continuous material impact and machine vibration, it holds the baffle flat to prevent curling, preserves reliable flow guidance and extends the service life of rubber parts.

product parameters

- Part Number: 200637070
- Name: Press Plate
- Applicable Model: RP705 medium crawler paver
- Material: High-strength carbon structural steel plate
- Process: Laser cutting, hole punching, edge rounding, sandblasting, anti-corrosion painting
- Matching Parts: Rubber baffle, bolt, flat washer
- Function: Clamp and fix rubber baffle, distribute clamping pressure, prevent baffle movement

Applicable Scenarios

It is installed inside the hopper of the RP705 paver and on the outside of the rubber baffle on the side wall of the material conveying channel. It is widely used in asphalt paving operations for municipal roads, highways, industrial parks, and airport runways.

advantage

- Made of thickened steel plate, it has sufficient rigidity and is not easily bent or twisted when compressed.
- The holes correspond one-to-one with the original rubber baffles, making assembly and alignment easy.
- Rounded edges prevent damage to the rubber baffle and reduce premature rubber breakage.
- The anti-corrosion coating has strong adhesion, withstands harsh construction conditions, and delays rusting.
- The pressing surface is flat, the force is even, and the rubber is evenly stressed after tightening.
- Original factory-molded size, direct replacement, no need for on-site cutting or drilling.

FAQ

Q: Can a slightly deformed press plate stay in use?
A: Minor warping may be corrected for temporary use. Replace it if heavily distorted or cracked.

Q: Must a rusted press plate be replaced?
A: It can be sanded and repainted if only surface rust exists. Replace if pitting reduces plate thickness and strength.

Q: Can custom-cut steel plate substitute this press plate?
A: Not recommended. Homemade plates rarely maintain flatness, correct hole spacing and safe rounded edges.

Q: Why does the rubber baffle still curl after installation?
A: It is usually caused by warped plate or uneven bolt torque. Tighten bolts diagonally or replace the plate.

Q: What problems arise if the press plate fails?
A: Unrestrained rubber baffle curls up, loses sealing function, causes heavy spillage and accelerates baffle tearing.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories