200636351 connector assembly for XCMG RP705 paver spare parts

Short Description:

Chain, Part No.800302197, Size 24B-1×54, is a single-row roller chain for XCMG RP705 medium crawler paver. It transmits torque through meshing with sprockets and is an important transmission part of the paver drive system.

Product Detail

Product Tags

description

This connector assembly is machined from high-strength steel with built-in seals, including connector body, sealing washers and locking structure for high-pressure pipeline connection. During paving, it bears continuous hydraulic pulse pressure and chassis vibration. The sealing area is affected by temperature fluctuation and asphalt dust. Aged seals, damaged threads or cracked body will lead to oil leakage and pressure drop. Failed connector will disturb the operation of hydraulic components. It is commonly used for maintenance of travel and track tension hydraulic circuits.

product parameters

Part No.:200636351
Product Name:Connector Assembly
Material:High-strength carbon steel
Seal:Oil-resistant rubber seal
Working Medium:Anti-wear hydraulic oil
Fluid Temperature:-20℃~+80℃
Function:Connect hydraulic hoses and steel pipes, link oil circuits, prevent oil leakage by sealing structure, guarantee stable hydraulic power transmission for travel and tension circuits

Applicable Scenarios

Installed on the undercarriage hydraulic circuit of XCMG RP705 paver, used to connect pipelines between travel motor, tension cylinder and hydraulic valve bank. Replace when leaking or thread damaged.

advantage

▪ Original assembly with precise thread and port angle, perfectly matched with pipelines
▪ High-strength body, pulse and vibration resistant, not easy to crack
▪ Stable supporting seals, oil and heat resistant for harsh site conditions
▪ Compact structure, save installation space and convenient for maintenance
▪ Quickly eliminate joint leakage and restore hydraulic pressure after replacement

FAQ

Q:Can I only replace the seal for slight leakage?
A:Yes if the thread and body are intact. Replace the whole assembly if the thread is stripped or the body cracked.

Q:Can hydraulic connectors with different part numbers be interchanged?
A:No. They differ in thread, port style and inner diameter. Install according to part number.

Q:Is higher tightening torque better?
A:No. Over-tightening causes thread damage and seal crushing. Tighten to specified torque.

Q:Will rust on the connector affect service?
A:Light surface rust can be cleaned. Replace if there is deep pitting or seized thread.

Q:Will connector leakage cause track deviation?
A:Leakage on travel circuit leads to unbalanced pressure between two sides, resulting in weak travel and deviation.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us