200636354 material conveying drive shaft for XCMG RP705 paver spare parts

product parameters

- Part Name: Feeder Drive Shaft
- Part No.: 200636354
- Compatible Model: XCMG RP705 medium crawler paver
- Material: Alloy structural steel
- Process: Forging, quenching and tempering, spline forming, journal precision grinding, surface hardening, anti‑rust treatment
- Built‑in Structure: Drive spline, bearing journal, sprocket mounting seat, locating shoulder
- Function: Transmit hydraulic motor torque, drive scraper chain and convey asphalt mixture

Applicable Scenarios

Suitable for feeder maintenance and overhaul of XCMG RP705 crawler paver; replacement of deformed or fractured original drive shafts on scraper feeding assemblies; spare parts for municipal and highway asphalt paving equipment; feeder transmission stock for construction parts suppliers.

- OEM forming dimension: Splines, journals and sprocket seats follow original design for precise alignment and perfect interchangeability.
- Forged alloy substrate: High torsional strength and strong resistance against bending under heavy load.
- Hardened working surfaces: Improved wear resistance on splines and journals to reduce galling and slack.
- Excellent fatigue resistance: Handles repeated alternating torque and delays crack initiation.
- Precision ground journals: Stable fit with bearings to cut heat build‑up and premature bearing failure.
- Full assembly compatibility: Fits OEM sprockets, bearings, oil seals and chains for fast overhaul.

FAQ

Q: Can feeder drive shaft 200636354 be used on other pavers?
A: It can be substituted only if overall length, spline, journal and sprocket dimensions match. It is primarily an OEM replacement for the XCMG RP705.

Q: Can a drive shaft with minor surface scratches stay in service?
A: Shallow scratches without bending or cracks may be monitored temporarily. Replace it once journals are scored, splines are worn, or bending and cracks appear.

Q: What should be noticed during installation?
A: Clean splines and journals before fitting, inspect bearings, seals and sprockets, align the assembly to avoid chain misalignment and side load, and fasten locating parts in sequence.

Q: What commonly causes feeder drive shaft failure?
A: Typical triggers include jammed chains, hard foreign objects in the hopper, over‑tight chains, failed bearings and continuous overload impact.

Q: How to maintain the shaft during routine inspection?
A: Remove large debris from the hopper regularly, adjust chain tension, listen for abnormal noise and vibration, and check bearing temperature and seals to block abrasive dust.