200636356 Right feeder drive shaft assembly for XCMG RP705 paver spare parts

200636356 Right feeder drive shaft assembly for XCMG RP705 paver spare parts Featured Image
  • 200636356 Right feeder drive shaft assembly for XCMG RP705 paver spare parts

Short Description:

Part No. 200636355, Left Feeding Drive Shaft Assembly, fits XCMG RP705 medium crawler paver. It is a pre-assembled integrated power transmission assembly for the left scraper feeding system.

Product Detail

Product Tags

description

This right feeding drive shaft assembly is a pre-assembled complete spare part, including main drive shaft, matched bearings, oil seals, drive sprocket, positioning sleeves and fasteners. The main shaft is forged from alloy structural steel with quenching-tempering treatment and journal surface strengthening for excellent torsion and bending resistance. Pre-calibrated before delivery with checked coaxiality, it greatly reduces assembly error on site compared with loose parts assembly. Designed for the independent right feeding passage of the paver, it supports differential speed adjustment between left and right feeding channels under control system to regulate material level and reduce asphalt segregation. It is built for long continuous paving and withstands site dust, hot mixture and alternating impact loads. Its counterpart, Part No.200636355, is the left feeding drive shaft assembly for paired installation.

product parameters

- Part Number：200636356
- Name：Right Feeding Drive Shaft Assembly
- Applicable Model：XCMG RP705 Medium Crawler Paver
- Matching Assembly：Left Feeding Drive Shaft Assembly (Part No.200636355)
- Built-in Components：Drive Shaft, Bearings, Oil Seals, Feeding Sprocket, Spacers, Fasteners
- Driven Object：Right Scraper Feeding Chain
- Function：Power transmission for right feeding passage

Applicable Scenarios

Specially for the right feeding mechanism of XCMG RP705 paver, widely adopted in asphalt paving of municipal roads, expressways, factory and airport pavements.

advantage

▪ Integrated OEM pre-assembled assembly dedicated for right side with precise interchangeability, no separate part selection required
▪ Alloy steel main shaft with heat treatment resists torsion and deformation; wear-resistant journal protects seals
▪ Pre-calibrated at factory for direct whole-unit replacement on site and shorter downtime
▪ Sprocket with accurate tooth profile meshes smoothly with 24B‑1 feeding chain to reduce jumping risk
▪ Matched seals and bearings deliver reliable sealing and block dust ingress and leakage
▪ Supports independent single-side speed control to adjust left and right material flow and reduce mixture segregation

FAQ

Q: Can the right assembly replace the left drive shaft assembly directly?
A: No. The left and right units differ in mounting structure and positioning dimension. Right: 200636356, Left: 200636355. They are not interchangeable.

Q: Should I replace the whole assembly if only the oil seal leaks?
A: If only the seal is aged while bearings remain intact, you may replace the seal alone. If journal scoring, excessive bearing clearance or heavy sprocket tooth wear exists, full assembly replacement is recommended.

Q: What adjustments are needed after installing the right feeding drive shaft assembly?
A: After installation, adjust chain tension, test speeds of left and right feeding motors, check material level feedback and confirm smooth operation without jamming or abnormal noise.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories