200636888 left bend plate for XCMG RP705 paver spare parts

200636888 left bend plate for XCMG RP705 paver spare parts Featured Image
  • 200636888 left bend plate for XCMG RP705 paver spare parts

Short Description:

Left Bent Plate, Part No. 200636888, fits XCMG RP705 medium crawler paver. It is a bent sheet metal deflector for the feeder system, mounted on the left side of the feeder assembly and matched with the left baffle and upper left cover.

Product Detail

Product Tags

description

This left bent plate is laser cut and bent according to OEM sheet metal drawings. Bend angle, contour curve and mounting holes fully match the left feeder mounting datum of RP705. It can be fitted directly without on‑site cutting or reworking. Made of wear‑resistant steel with smooth bend transition for good impact resistance, it is coated for rust protection against asphalt slurry, muddy water and dust. Pre‑drilled mounting holes accept original bolts. It serves as OEM replacement for twisted, cracked, broken or worn original deflectors, a matching sheet metal part for the paver scraper feeder.

product parameters

- Part Name：Left Bent Plate
- Part No.：200636888
- Compatible Model：XCMG RP705 medium crawler paver
- Material：Wear‑resistant steel plate
- Process**：Laser cutting, bending, punching, deburring, anti‑rust painting
- Built‑in Structure：Deflecting bent surface, mounting lugs, locating holes
- Function：Guide and retain asphalt mixture, avoid jamming and protect side feeder parts

Applicable Scenarios

Suitable for feeder maintenance and overhaul of XCMG RP705 crawler paver; replacement of damaged original left bent plates; spare parts for municipal and highway asphalt paving equipment; feeder deflector sheet metal stocked by construction parts suppliers.

advantage

- OEM bent profile: Deflection angle and hole layout follow original design for easy alignment and interchangeability.
- Wear‑resistant steel substrate: Withstands continuous aggregate friction and flying stone impact for longer service life.
- One‑piece bend construction: Reinforced bend zone to resist crack propagation along the fold.
- Smooth deflecting surface: Guides material evenly toward the scraper and reduces segregation from pile‑up.
- Anti‑corrosion coating: Slows corrosion by asphalt slurry and mud to prevent perforation.
- Easy installation: Standard holes reuse original fasteners and cut down service time.

FAQ

Q: Can this left bent plate substitute for the right one?
A: No. Left and right bent plates are mirror‑specific with different bend direction and lug positions and are not interchangeable.

Q: Is immediate replacement needed for a slightly dented but uncracked bent plate?
A: It can remain in service if it does not rub the chain, trap material or disrupt flow. Replace it once cracked, pinching the chain or causing persistent buildup.

Q: What should be noted during installation?
A: Clear accumulated material before fitting, align all locating holes and tighten bolts evenly, and maintain proper clearance between plate and scraper chain.

Q: What causes most failures of the bent plate?
A: Impact from large stones, friction by misaligned chains, long‑term abrasive wear and hammering during cleaning.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories