200638879 right rear side protection for XCMG RP705 paver spare parts

200638879 right rear side protection for XCMG RP705 paver spare parts Featured Image
  • 200638879 right rear side protection for XCMG RP705 paver spare parts

Short Description:

800302177, Swivel Joint with Wing Plate, suitable for XCMG RP705 medium crawler paver. It is a high‑pressure hydraulic swivel fitted with locating wing plates.

Product Detail

Product Tags

description

This genuine right rear guard is fabricated from heavy‑duty steel plate through bending and welding, with standard mounting holes and machine‑matched profile. Anti‑rust paint treatment delivers good impact resistance and deformation resistance. During paving, flying aggregate and hot asphalt tend to strike rear oil lines and bearing assemblies. This guard acts as a barrier, reducing impact damage and asphalt buildup, and lowering the risk of ruptured hoses and leaking swivels. Deformation, tearing, elongated holes or heavy corrosion will expose internal parts and raise failure rates. Replace the guard if it is heavily damaged during overhaul.

product parameters

- Part No.: 200638879
- Name: Right Rear Guard
- Applicable Model: XCMG RP705 medium crawler paver
- Material: Carbon structural steel plate
- Process: Cutting, bending, welding, drilling, derusting, anti‑corrosion painting
- Matching parts: Fixing bolts, washers
- Function: Protect hoses, fittings and bearings on the right rear of feeding assembly, block material impact and isolate moving parts

Applicable Scenarios

Protection for the right rear of paver feeding assembly; replacement for torn, deformed or rusted old guards; outer shielding for feeding hydraulic lines; inspection and renewal during machine maintenance; pre‑assembly for new feeding sections.

advantage

- Original formed profile matches machine contour with accurate holes for easy fitting
- Robust steel plate withstands aggregate impact and protects delicate hydraulic components
- Anti‑corrosion paint resists hot asphalt and muddy water to slow rusting
- Well‑designed cutouts avoid interference with chains, rollers and hoses
- Simple disassembly and individual replacement protects costly internal parts and cuts repair cost

FAQ

Q: Can a slightly deformed guard be straightened and reused?
A: Minor denting without cracks or stretched holes is acceptable after straightening. If there are tears or cracked welds, replacement is recommended.

Q: Is there a correct orientation for installation?
A: Yes. The folded rim should face incoming flying material. Align it against the original part to avoid contact with chains and hoses.

Q: How to maintain the guard covered with asphalt?
A: Clear residue after cooling. Avoid heavy hammering during cleaning to prevent plate deformation.

Q: Can left and right guards be interchanged?
A: This is a dedicated right rear guard with asymmetric shape and cannot be swapped with the left one.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories