201000156 Pin for XCMG RP705 paver spare parts

Short Description:

Washer, Part No.200635109, is a standard fastener accessory for XCMG RP705 medium crawler paver. Used with bolts and nuts to distribute pressure, prevent loosening and protect mating surfaces.

Product Detail

Product Tags

description

This cylindrical pin is precision machined from alloy structural steel with surface hardening treatment for high dimensional accuracy. During paving, the hinge joints rotate repeatedly under vibration and impact. The pin acts as the pivot shaft to transfer loads. Under long-term erosion of hot asphalt and grit, the pin surface will wear, score or bend, leading to excessive clearance, shaking and unstable paving thickness. Replace it timely once worn or deformed.

product parameters

Part No.:201000156
Product Name:Cylindrical Pin
Material:Alloy structural steel, surface quenched
Processing:Precision turning and heat treatment
Working Condition:Alternating impact load, continuous vibration, high temperature and dust
Function:Serve as hinge pivot, bear loads and ensure flexible rotation

Applicable Scenarios

Installed on hinge joints of screed, pull rod bracket, auger link and hopper of XCMG RP705 paver. Replace when worn, scored, bent or with excessive clearance.

advantage

▪ OEM precision machining, tight tolerance for good fit with bushings
▪ Quenched surface for excellent wear and impact resistance
▪ High bending strength, not easy to deform under alternating heavy load
▪ Compatible with locking parts to prevent falling off
▪ Easy to disassemble, can be used with separate retaining rings and cotter pins

FAQ

Q:Can a slightly worn pin keep working?
A:Minor wear without scoring or play is acceptable for temporary use. Replace if worn thin or scored.

Q:Is regular greasing required?
A:Yes. Grease the hinge regularly to reduce friction between pin and bushing.

Q:Can pins from different positions be swapped?
A:No. Diameter, length and lock hole position differ. Match by part number.

Q:Can I straighten a bent pin for reuse?
A:Not recommended. Residual stress after straightening will cause re-bending or fracture.

Q:Is this pin the same as the pin inside latch pin assembly?
A:Not necessarily. Structure and heat treatment vary. Do not mix, use part number for confirmation.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us