201602522 positioning plate for XCMG RP705 paver spare parts

201602522 positioning plate for XCMG RP705 paver spare parts Featured Image
  • 201602522 positioning plate for XCMG RP705 paver spare parts

Short Description:

Adjusting Screw, Part No.: 200636318, fits XCMG RP705 medium crawler paver. It is a threaded adjusting screw that converts rotary motion into linear push‑pull movement.

Product Detail

Product Tags

description

This paver positioning plate is made of high-quality steel plate through cutting, bending and machining. The plate surface is flat with accurately machined positioning holes. After quenching and tempering as well as anti-rust surface treatment, it owns good rigidity and impact resistance. Under the working conditions of paver vibration and continuous feeding, it can limit and position pins, bearing housings, support plates and other parts to prevent shifting and misalignment. As an original replacement spare part, it can directly replace aged, deformed or cracked old pieces, widely used for equipment overhaul and routine maintenance.

product parameters

- Part No.: 201602522
- Name: Positioning Plate
- Applicable Model: XCMG RP705 medium crawler paver
- Material: High-quality carbon structural steel
- Process: CNC machining, quenching and tempering, anti-rust surface treatment
- Function: Positioning, limiting and fixing

Applicable Scenarios

Positioning and limiting for paver conveying mechanism, hopper assembly, pin shaft assembly and bearing seat; reset positioning after equipment disassembly and maintenance; replacement of deformed, worn or broken original positioning plates; positioning and fixing during new machine assembly.

advantage

- Machined according to original drawings with precise hole positions for easy alignment without on-site trimming
- Quenched and tempered steel with sufficient rigidity, impact resistance and resistance to twisting deformation
- Anti-rust coating to resist asphalt dust and mud erosion for longer service life
- Stable limiting effect reduces component shifting and abnormal wear of pins and bearings
- Specially matched for RP705 with unified specifications, convenient for stocking and batch replacement

FAQ

Q: Can a slightly deformed positioning plate keep in service?
A: Continuous use is not recommended. Once deformed, its positioning datum will deviate, resulting in poor coaxiality and accelerated wear of pins and bearings. It may even cause jamming in severe cases and shall be replaced timely.

Q: What are the key points for installing the positioning plate?
A: Clean debris on the mating surface before installation, align the positioning holes, fasten evenly with original fasteners to ensure close contact and avoid one-sided stress.

Q: Can this positioning plate fit other pavers?
A: It is primarily designed for XCMG RP705. Replacement on other pavers is allowed only when the part number, hole layout and outline are completely identical; otherwise assembly errors will occur.

Q: How often should we inspect the positioning plate?
A: Inspection is recommended after each paving cycle. Check for cracks, deformation and rust, and replace it immediately once damage is found.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories