225703071 right rear wheel for XCMG XP203 pneumatic-tyred roller

Short Description:

225703070 Left Rear Wheel is a dedicated rear wheel assembly for XCMG XP203 pneumatic tyre roller. It features high-strength rim, wear-resistant rubber tyre and stable dynamic balance, providing reliable support, traction and compaction contact. Standard OEM size and mounting interface enable direct replacement, ensuring consistent driving and rolling performance.

Send email to us

Product Detail

Product Tags

description

Part number: 225703071
Part name: right rear wheel
Unit name: 225702991 Back drum
Applicable Models: XCMG XP203 pneumatic-tyred roller

Number	Parts Name	Quantity	Material Encoding
1	TIRE	3	800302425
860145396	TIRE	3	860145396
2	TIRE RIM	3	800302422
3	BRAKE DRUM	2	225701934
4	BOLT M8×16	16	805004755
5	COVER	2	225702223
6	PIN 8×100	2	805639628
805600024	PIN 8×100	2	805600024
7	NUT	2	225701930
8	ANELLO DI SICUREZZA	2	225701931
9	NUT Q30220	20	800302754
10	REAR TYRE SEAT	2	225701928
11	BOLT	20	225702321
12	WASHER 16	16	805301377
13	BOLT	16	805046573
14	KEY 25×14×100	2	805701085
15	REAR WHEEL SHAFT	1	225701950
16	KEY 28×16×140	1	805701093
17	BRAKE	2	800302449
18	NUT M90×2	2	805239195
805201494	NUT M90×2	2	805201494
19	RONDELLA 90	2	805338877
805301361	垫圈 90	2	805301361
20	SHAFE SLEEVE	2	225701935
21	BOLT	16	805049088
22	SHIM	8	225701933
23	PIN 12×40	4	805600352
24	SCREW PLUG M10×1	2	803107816
25	BEARING SEAT	2	225701949
26	OIL CUP M10×1	4	801100336
801103215	TAZZA OLIO	4	801103215
27	WASHER 10	4	805300037
28	CONNECTOR	2	225702010
29	PRESSING PLATE	1	225701942
30	BOLT	4	805046596
31	WASHER	4	805338365
32	SEALING RING	2	803164072
33	CUSCINETTO6218	2	800551915
800511445	CUSCINETTO	2	800511445
34	SHAFT SLEEVE	2	225701936
35	CUSCINETTO 22220 C/W33	2	800511454
36	LIP-TYPE SEAL RING B110×140×12	2	800901334
37	PAPER GASKET	2	225701939
38	BEARING CAP	2	225701938
39	BOLT M12×1.25×30	12	805049086
40	BOLT M20×1.5×70	10	805049098
41	WASHER	10	805301379
42	REAR WHEEL AXLE JOINT	1	225701951
43	RONDELLA	10	225702556
44	KEY 32×18×130	1	805701097
45	REAR WHEEL SHAFT	1	225701955
46	REAR WHEEL AXLE JOINT	1	225701954
47	LARGE CHAIN WHEEL	1	225703072
48	SHIM	5	225701947
49	BOLT M20×1.5×55	10	805048812
50	PRESSING PLATE	1	225701948
51	BOLT M12×30	2	805004699
805046483	BOLT	2	805046483
52	CHAIN WHEEL COVER	1	225702131

FAQ

What is the core function of 225703071 right rear wheel?

It supports the rear weight of the roller, transmits driving power, maintains stable ground contact, and participates in pavement compaction to ensure smooth running and even pressure distribution.
What structural advantages make it suitable for long-term construction work?

The rim features high rigidity and deformation resistance; the tire uses engineering-specific rubber with excellent cut resistance, aging resistance and fatigue resistance for long service life.
Can this wheel assembly be installed directly without adjustment?

Yes. Mounting hole layout, center bore, offset and installation direction are all designed to original factory standards, realizing direct and accurate assembly without modification.
What faults will be caused by worn or damaged right rear wheel?

It will result in uneven compaction, body vibration, running deviation, increased tire wear and poor operation stability, affecting construction efficiency and quality.
When does the right rear wheel need to be replaced?

Replacement is required when the tire is seriously worn, cracked, bulged or irreparably punctured, or the rim is deformed, cracked and loses dynamic balance.
How does this wheel assembly improve compaction uniformity?

Stable structure and standard profile ensure consistent grounding pressure, avoiding local over-compaction or under-compaction and improving overall pavement flatness.
What daily maintenance helps extend its service life?

Regularly check tire pressure, clean embedded gravel, avoid hard impact, prevent oil contamination and long-term sun exposure.

advantages

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. In Time Delivery Time, with competitive shipping cost
4. Stable stock for normal parts
5. Professional and on time after service

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.