22C0358 Bushing Liugong CLGB320C bulldozer spare parts

Short Description:

22C0358 Bushing is wear‑resistant fitting for hinged moving positions of Liugong CLGB320C bulldozer. It is installed between pin shaft and frame hinge hole to reduce friction, provide guiding function and buffer impact load of pin shaft, avoid direct metal‑to‑metal abrasion and guarantee smooth lifting & swinging movement of dozer blade. Timely replacement is required when bushing inner wall is worn‑out, scratched, over‑gapped or generates abnormal rotating noise, so as to prevent further damage to pin shaft and hinge hole.

Send email to us

Product Detail

Product Tags

description

Part number: 22C0358
Part name: Bushing
Unit name: 34C2343X0 Fork Component
Applicable Models: Liugong CLGB320C crawler bulldozer

Compatible with Liugong Bulldozer CLGB320C. Suitable for heavy‑duty dozing conditions including mine stripping, earth‑rock excavation, quarry operation and muddy site work. Applied for excessive clearance at dozer‑blade hinge position, working vibration & abnormal noise, pin‑shaft inspection and working‑mechanism overhaul maintenance. Fit for original spare‑part replacement, mine‑project maintenance in Middle East and Southeast Asia, hinge‑position service for CLGB320C bulldozer working mechanism.

ITEM/PART NO./PART NAME

1 FORK B 1
2 22C0358 BUSHING 2
3 COVER B 2
4 06B0223 WASHER 4 18
5 01B1131 BOLT 4 M18×90-10.9-DK
6 10B0344 GREASE FITTING 2 M10×1 (INTERCHANGEABLE WITH 10B0014. THE MATERIAL OF 10B0344 IS ST.STEEL)
7 66A0187 PIN 2

=======================================

advantages

High‑strength wear‑resistant alloy material with good impact‑resistance and compression‑resistance, withstand heavy impact from dozer blade for long service life
Inner bore and outer diameter strictly follow OEM standard with reasonable fitting clearance to ensure flexible pin‑shaft rotation without jamming
Oil‑storage lubrication groove design keeps grease in place and reduces dry friction, adapting to harsh dusty site environment
Accurate interference‑fit dimension, anti‑loosening after press‑fitting and lower risk of premature wear failure.

FAQ

Q: Can slightly worn bushing be repaired by welding for reuse?
A: Welding easily causes deformation and dimension error. Repair is not recommended under mine heavy‑load condition, replace with new bushing directly.
Q: What causes stiff rotation after new bushing press‑fitting?
A: Inspect housing‑hole deformation, skewed bushing and worn pin shaft first, then reassemble after troubleshooting.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.