250-9947 engine idler shaft CAT spare part

Short Description:

245-6202 CAT pump drive shaft, hydraulic pump input drive shaft. It is installed at the drive end of hydraulic pump, receives torque from engine or transmission structure and drives internal pump components to rotate, supplying power for the machine hydraulic system.


Product Detail

Product Tags

description

This CAT idler shaft is integrally forged from high-strength alloy steel. Journal mating surfaces are precision ground and quenched with tight dimensional tolerance. It is installed inside engine gear housing as fixed supporting spindle for idler gear. The idler gear rotates around this shaft to realize direction change, tensioning and backlash adjustment. It withstands alternating impact load and engine oil scouring, reduces gear runout and uneven wear. It serves as overhaul replacement part for CAT engine drive system.

Part number: 250-9947
Brand: CAT
Type: engine idler shaft
Material: Low Alloy Steel
Processing: one-piece forging, journal precision grinding, surface quenching, anti-rust and wear-resistant treatment
Matching parts: idler gear, bushing, bearing, oil seal, retaining ring

Advantages:

1. Inspect idler gear, bushing, bearing and oil seal during disassembly; replace worn and aged parts together
2. Clean sludge and metal debris inside gear housing before installation, hard particles scratch journal surfaces
3. Check gear rotation flexibility after assembly and adjust backlash to avoid jamming and uneven wear
4. Fill specified engine oil after installation, listen for abnormal noise and check oil seal leakage regularly

FAQ 

Q: What faults will be caused by worn or deformed idler shaft?
A: Idler gear wobble, abnormal backlash, abnormal transmission noise, gear jam and tooth breakage, power cut-off in severe cases.

Q: Can this idler shaft be purchased separately?
A: It is an individual spare part available for separate purchase.

Q: Is it recommended to replace oil seal and bushing together?
A: Replacement is recommended. Bushings and oil seals are wearing parts, which are easy to let impurities in and leak oil after aging.

Q: Where does wear mainly occur?
A: Supporting journal surfaces matched with bushings and bearings.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us