252000125 locking angle bracket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

- Product Name: Locking Angle Bracket
- Part Number: 252000125
- Applicable Equipment: XCMG ZL50G, ZL50GL Wheel Loader
- Main Material: Thickened Q235 angle steel
- Manufacturing Process: Profile blanking, punching, bending, stress relief shaping, deburring, sandblasting and painting
- Surface Treatment: Sandblasting derusting, anti-rust primer, weather-resistant topcoat for construction machinery
- Installation Position: Loader adjusting and locking assembly
- Fastening Method: Clamp and limit together with locking screw rod and nuts
- Supply Note: Single locking angle bracket supplied; locking screw rods, nuts and washers are separately optional parts
- Functions: Transfer locking force with screw rods, limit the adjusting mechanism, disperse vibration load and prevent looseness and displacement
- Working Conditions: Sand and stone yards, mines, earthwork infrastructure, mixing plants, material transfer yards and other heavy-duty vibrating operation sites

• Consistent bending angle and hole dimensions with original parts, excellent interchangeability, direct installation without secondary modification
• Thickened angle steel substrate with high rigidity, resistant to twisting and bending under load and outstanding impact resistance
• Precision machined load holes with smooth inner wall, reducing friction wear on screw rods and extending service life of the whole locking set
• Double-layer anti-corrosion coating, resistant to moisture, dust and gravel erosion for longer outdoor service life
• L-shaped mechanical structure for even force distribution, effectively avoiding hole tearing and stress concentration
• Independent split part, separate replacement without whole adjusting assembly to save maintenance cost
• Calibrated before delivery with minimal deformation, fits mounting surface closely and bears load evenly after locking

FAQ 

Q1: Can this locking angle bracket fit ZL50GN loader directly?
A1: Part No.252000125 is specially for ZL50G and ZL50GL. ZL50GN has different adjusting locking structure and unmatched holes. Direct interchange is not recommended. Verify old part number before ordering.

Q2: Can a slightly deformed angle bracket keep working?
A2: Deformation leads to offset locking holes and unbalanced load. It may loosen or tear under vibration and bring safety risks. Replacement is recommended.

Q3: Are supporting locking screw rods and nuts included?
A3: Standard package only contains the angle bracket. Screw rods, nuts and washers are optional parts. You can order the full set separately.

Q4: How to deal with paint peeling and rust?
A4: Clean light surface rust and re-spray primer and engineering yellow topcoat. Replace immediately if the plate is thinned by rust or holes are torn and cracked.

Q5: What should be noted during installation?
A5: Align holes to ensure smooth penetration of screw rods. Tighten evenly on both sides to prevent twisting. Check locking status regularly after installation to avoid loosening.