252101544 lamp bracket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

- Product Name: Lamp Bracket
- Part Number: 252101544
- Applicable Equipment: XCMG ZL50G, ZL50GL Wheel Loader
- Main Material: Bent and welded assembly of Q235 carbon steel plate
- Manufacturing Process: Plate blanking, bending forming, punching, fixture welding, stress relief calibration, deburring and shaping
- Surface Treatment: Sandblasting derusting, anti-rust primer, weather-resistant topcoat for construction machinery
- Installation Position: Lighting mounting position on loader body
- Fastening Method: Bolted to frame support, fasten lamp with bolts
- Supply Note: Single lamp bracket supplied; bolts, flat washers and spring washers are separately optional parts
- Functions: Support and fix working lamp, damp vibration, prevent loosening and lamp damage from collision and displacement
- Working Conditions: Sand and stone yards, mines, earthwork infrastructure, mixing plants, night transfer yards and other dim operation sites

• Mounting holes and dimensions consistent with original parts, good interchangeability, direct installation without secondary modification
• Bent and welded steel structure with sufficient rigidity, resistant to vibration and minor scraping, not easy to twist
• Precision deburred edges without sharp corners to prevent harness sheath damage
• Double-layer anti-corrosion coating, resistant to rain, sediment and salt corrosion for long outdoor service life
• Clearance design, no friction or interference with surrounding guard plates, oil pipes and wiring harnesses
• Independent split bracket, separate replacement without whole lamp assembly to save maintenance cost
• Calibrated before delivery with little welding distortion, fits the frame surface and bears load evenly
• Fully compatible with original lighting system of ZL50G/ZL50GL, well matched with guard plates and mudguards of the same series

FAQ 

Q1: Can this lamp bracket fit ZL50GN loader directly?
A1: Part No.252101544 is specially for ZL50G and ZL50GL. ZL50GN has different lighting support structure and unmatched holes. Direct interchange is not recommended. Verify old part number before ordering.

Q2: Can a slightly deformed lamp bracket keep working?
A2: Deformation causes lamp tilt and hole misalignment. The lamp may fall off under vibration and lead to lighting failure. Replacement is recommended.

Q3: Are bolts for lamp fixing included?
A3: Standard package only contains the lamp bracket. Bolts and gaskets are optional parts. You can order fasteners separately.

Q4: How to deal with paint peeling and rust?
A4: Polish light rust and re-spray primer and engineering yellow topcoat. Replace immediately if the plate is thinned by rust or welds crack.

Q5: What should be noted during installation?
A5: Fasten the bracket to the frame support first, then install the lamp. Tighten bolts evenly in diagonal order to avoid twisting. Check after installation to ensure the lamp is stable without interference.