252101782 bucket for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: Reinforced Earthmoving Bucket Assembly
Part No.: 252101782
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Bucket Type: Reinforced Earthmoving Bucket
Material: High strength wear-resistant steel Q355 / NM400
Matching parts: Middle bucket tooth, left tooth, right tooth, tooth adapter, lock pin, circlip
Connection Type: Hinge lug connection
Working Condition: Earth and rock excavation, sand and aggregate loading, construction waste transfer
Inspection Items: Dimension inspection, weld flaw detection, assembly fit verification

Applicable Scenarios

It fits XCMG ZL50G and ZL50GL loaders, widely used in construction sites, aggregate yards, road foundation projects and construction waste yards. Suitable for earth digging, gravel loading and mixed material transfer. It is stronger than ordinary standard earth buckets and can handle materials mixed with a small amount of crushed stone. It is not designed for long-term heavy-duty quarrying with large hard rocks; a dedicated rock bucket is recommended for rock work.

- Original matched hinge dimensions with accurate lug hole spacing, direct installation on boom and tilt linkage without cutting or modification
- Reinforced structure based on standard earth bucket, better impact resistance for mixed materials containing crushed stone
- Smooth curved bucket body, high fill rate and clean dumping, less material adhesion
- Modular wear part design, cutting edge, tooth adapters and side plates can be replaced individually for cost-effective maintenance
- Stress relief welding process reduces weld cracking and plate deformation caused by alternating heavy impact
- Compatible with standard earth bucket teeth for ZL50G / ZL50GL, intact old teeth and adapters can be reused
- Large market stock and stable spare parts supply, convenient for stock preparation and emergency replacement

FAQ 

Q：What is the difference between this reinforced bucket and standard earth bucket?
A：This bucket uses thicker plates on bottom, bucket root and lugs with reinforced structure for better impact resistance and can work with materials mixed with small crushed stones. Standard earth bucket is for loose soil and fine sand only.

Q：Can it load large rocks for a long time?
A：Not recommended. It is a reinforced earth bucket rather than professional rock bucket. Continuous loading of big hard rocks will lead to weld tearing and bottom plate cracking. Use rock bucket for rock conditions.

Q：Can I reuse old earth bucket teeth on this bucket?
A：Yes, if teeth, adapters and pins are free from severe damage and deformation. Clean sand and rust and check fit before assembly.

Q：What should be noticed during bucket installation?
A：Follow lifting safety rules. Clean pins and apply grease. Test bucket movements repeatedly after installation to make sure no interference or jamming before operation.

Q：What to do if small cracks appear on welds?
A：Minor cracks on non-load-bearing areas can be welded and polished by professional welders. Cracks on bucket root and lugs are high risk; replace the whole bucket after evaluation.