252102883 fuel filling pipe for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

252102883 fuel filling pipe is a dedicated oil filling pipeline assembly matched for XCMG ZL50G and ZL50GL 5-ton wheel loaders.

Product Detail

Product Tags

description

This fuel filling pipe adopts multi-layer composite rubber hose with built-in high-density fiber braid reinforcement layer. The pipe body is constructed by co-extrusion molding process, integrating oil-resistant inner lining, fiber reinforcement layer and weather-resistant outer rubber layer into one integrated structure. Both ends are equipped with precision machined metal connecting joints, adopting professional high-pressure hydraulic crimping technology for permanent assembly. The crimping position undergoes strict dimensional control and pull-out force testing to ensure the hose and metal joints will not separate under repeated vibration and oil pressure impact. The tube body retains proper flexibility, can adapt to slight displacement and vibration offset generated between fuel tank and filler neck during loader operation, effectively relieve stress concentration at the connection part.

product parameters

Part No:252102883
Product Type:Fuel Filling Hose Assembly
Applicable Equipment:XCMG ZL50G / ZL50GL 5 Ton Wheel Loader
Core Technology:Fiber braid reinforcement layer, crimped metal joint process
Material:NBR rubber outer layer + fiber braid reinforcement + inner oil-resistant rubber lining
Surface Treatment:Extruded rubber surface, metal joint zinc plating anti-corrosion
Inner Diameter:42mm,the inner diameter size is consistent along the whole pipe, reducing flow turbulence during fuel filling
Outer Diameter:54mm,outer diameter tolerance strictly controlled to guarantee fit clearance with pipe clamp
Effective Pipe Length:510mm,measured between the center of two end joints, matching the original vehicle installation layout
Connector Outer Diameter:48mm,precision machined metal connector, ensure tight fit with installation seat
Burst Pressure:≥1.6MPa,the minimum destructive pressure tested by hydraulic pressure test bench
Working Pressure:≤0.4MPa,long-term safe working pressure for normal refueling and vehicle operation
Working Temperature Range:-40℃ ~ +100℃,adapt to low temperature winter construction and high-temperature summer operation environment
Minimum Bending Radius:120mm,the smallest bending radius without pipe deformation and inner layer damage
Weight:1.35kg,total assembly weight including hose and two metal crimped joints
Application:Fuel delivery pipeline for diesel refueling

advantage

• NBR oil-resistant rubber lining, excellent compatibility with diesel fuel, long-term contact with oil will not swell, soften or dissolve, maintain stable pipe inner wall performance.
• Metal joints adopt zinc plating anti-corrosion treatment and high-pressure crimping process, the connection between hose and metal joint is firm, will not separate or leak under strong vibration.
• Good low-temperature flexibility, it will not harden and brittle in cold winter environment, suitable for construction work in different climate regions.
• OEM standard size, perfectly match original mounting brackets and connectors, quick to install and replace, reduce equipment downtime during maintenance.
• Smooth inner tube wall, low flow resistance, ensure fast and stable fuel filling speed, shorten refueling waiting time for construction machines.
• Strong weather resistance, resist ultraviolet radiation, rainwater and mud erosion, slow down rubber aging, extend service life in harsh outdoor construction environment.

FAQ 

Q1:What signs indicate the fuel filling pipe needs replacement?
A1:Oil leakage at pipe joints, hose surface crack, rubber aging hardening, pipe bulging, internal delamination, obvious fuel smell around the tank area.

Q2:What should be noted during fuel filling pipe installation?
A2:Clean mounting interface and remove old sealant and dirt. Avoid sharp edges scratching the hose body. Arrange proper pipe routing, prevent excessive bending or stretching, fix pipe clamp firmly.

Q3:What are the common causes of fuel filling pipe damage?
A3:Long-term oil aging of rubber material; sharp stones scratch the hose; excessive bending during installation; loose clamp leading to vibration friction and wear; chemical corrosion from muddy water.

Q4:Can leaking fuel pipe be wrapped and repaired for reuse?
A4:Not recommended. Once rubber hose cracks or inner layer delaminates, hidden damage still exists even after wrapping. It may suddenly rupture during refueling, cause fuel leakage and fire risk, better to replace with new pipe.

Q5:How to inspect fuel filling pipe in daily maintenance?
A5:Check pipe surface for cracks, blisters and oil stain traces. Check joint clamps for looseness. Check whether there is diesel odor near fuel tank during routine inspection.

Q6:What risk will failed fuel filling pipe bring?
A6:Diesel leakage may occur. Fuel not only causes economic loss, also forms flammable vapor. In severe cases, leakage fuel meets high-temperature components and triggers fire hazard, additionally impurities can enter fuel tank to block fuel filter and injector.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us