252110004 right side cutting block for XCMG ZL50G/ZL50GL Wheel Loader

product parameters

Product Name: Right Side Cutting Block for Mining Bucket
Part No.: 252110004
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Matching Parts: Mining rock bucket
Material: Wear-resistant alloy steel (quenched and tempered)
Matching parts: High-strength bolts, flat washers, spring washers
Installation: Bolted on the right end of bucket cutting edge
Working Condition: Quarry, hard rock digging, crushed stone handling, crusher feeding
Inspection Items: Dimension inspection, hardness sampling, surface crack inspection

Applicable Scenarios

It matches mining rock bucket for XCMG ZL50G and ZL50GL, widely used in quarry and crusher feeding. It provides cutting and protection on the right side when loading limestone, granite and gravel mixture, working together with middle block and left blade. Earth and light-material buckets normally do not equip this side block.

- Made according to original drawing specifications. Hole spacing and contour match perfectly with bucket edge. No on-site grinding is required to shorten installation time
- Integrally quenched alloy steel delivers high surface hardness and good core toughness, balancing wear resistance and impact resistance to protect bucket base plate
- Bolt-on split design allows individual replacement without disassembling other bucket parts, lowering maintenance cost and reducing production downtime
- Custom curved profile fits bucket corner geometry, ensures smooth cutting, reduces material jamming and digging resistance, helping reduce fuel consumption
- Sacrificial design absorbs rock abrasion and impact, protecting expensive bucket edge plate and lowering bucket repair frequency
- Fully compatible with middle block, left blade and mining bucket, easy for customers to purchase and stock as a complete set

FAQ 

Q：Can right block be installed on left side or replace middle block?
A：No. Its profile, holes and force surface are designed for the right side only. Improper fit leads to offset load, loosening and damage to bucket plate.

Q：Can chipped or cracked block keep working?
A：Not recommended. Cracks propagate under cyclic rock impact. Stone debris stuck in cracks will worsen damage and scratch bucket edge. Replace immediately.

Q：Why do bolts get loose easily?
A：Strong vibration and alternating load in quarry. Always use new spring washers, clean screw threads and tighten bolts diagonally. Check tightness before every shift.

Q：Can it be fitted on earth bucket or light bucket?
A：Not recommended. Earth buckets have no pre-drilled holes and do not require this heavy-duty side cutter. Retrofit will bring extra cost with little benefit.

Q：Can I repair it by hardfacing welding?
A：Not recommended. Welding heat destroys the quenched layer, resulting in uneven hardness and much shorter service life.

Q：What to check when receiving goods?
A：Verify part number, check cracks, warping and casting defects, measure hole spacing, test fit and inspect bolts for thread damage.