252900675 front cover for XCMG ZL50G/ZL50GL Wheel Loader

252900675 front cover for XCMG ZL50G/ZL50GL Wheel Loader Featured Image
  • 252900675 front cover for XCMG ZL50G/ZL50GL Wheel Loader

Short Description:

Front Cover, Part No.252900675, fits XCMG ZL50G, ZL50GL wheel loader. It is a cab front interior trim and protective cover accessory.

Product Detail

Product Tags

description

This 252900675 front cover is matched for the cab of XCMG ZL50G and ZL50GL wheel loaders, belonging to the cab interior covering category. In parts catalogs, this part number is listed as the cab front cover , applicable to the front area of the ZL50G series cab. The cab front bulkhead area contains the lower instrument panel structure, harness routing, and floor transition. The front cover conceals internal structures, closes gaps, reduces dust ingress, and finishes the interior.
This front cover is manufactured to OEM outline contour, mounting clip positions, and cab front bulkhead shape, matching the front area of ZL50G and ZL50GL cabs without modifying the original structure after installation. The cover body has certain rigidity to maintain shape stability under equipment vibration without easy loosening. Edges fit the cab bulkhead with seals or clips for relative closure. Material and surface treatment suit the cab interior environment for easy cleaning.

product parameters

Product Name: Front Cover
Part No.: 252900675
Applicable Model: XCMG ZL50G, ZL50GL Wheel Loader
Type: Cab interior covering accessory
Installation Position: Cab front bulkhead area (below instrument panel / floor transition)
Function: Interior covering, gap closure, dust/noise insulation, harness concealment
Body Material: Subject to actual product
Installation: OEM clips/fasteners

Applicable Scenarios

Widely used in quarry, aggregate yard, and earthwork construction sites with heavy dust and obvious vibration. It is a basic covering accessory for maintaining cab interior integrity and driving environment.

advantage

▪ OEM outline contour and clip positions for direct replacement on ZL50G/ZL50GL
▪ Covers cab front bulkhead gaps, reducing dust and draft ingress
▪ Conceals internal harnesses and structures for neat interior
▪ Structural rigidity meets cab vibration requirements, resisting loosening and deformation
▪ Edges fit the cab bulkhead with clips/seals for relative closure
▪ Can be stocked together with instrument boxes, control boxes, rubber floor mats, and related interior accessories

FAQ 

Q：When does the front cover need replacement?
A: Replace when deformation prevents proper fit, broken clips cause loosening, surface damage or cracking affects covering and sealing, or lifted edges allow dust and draft ingress.

Q：Is cab dust ingress always caused by the front cover?
A: Not necessarily. Check cab door seals, glass seals, and floor hole seals first. Inspect the front cover for deformation or clip failure after confirming other sealing areas are normal.

Q：Can the front cover be partially repaired?
A: Minor deformation can be corrected, and local damage can be temporarily treated with interior repair material. When clips break or cover deformation affects fit and sealing, assembly replacement is recommended.

Q：What to note during front cover installation?
A: Confirm the cover model matches the cab front bulkhead contour and clean the mounting surface and check clip integrity before installation. Align and press clips sequentially to ensure edges fit without lifting.

Q：How to maintain the front cover daily?
A: Regularly check for deformation, clip looseness, and edge lifting. Avoid corrosive cleaners during cleaning and address damage promptly.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories