262-7162 connecting rod bearing shell CAT spare part

Short Description:

393-7801 CAT stabilizer cross link (Panhard rod), rigid transverse tie rod. It fits 725C,730,735 series articulated dump trucks, limits lateral frame movement and reduces body sway to keep machine stable during travel and dumping.


Product Detail

Product Tags

description

This CAT connecting rod bearing adopts steel back with multi-layer alloy composite structure, precision anti-friction alloy surface and locking tang to prevent rotation after installation. It fits multiple CAT construction diesel engines. Mounted inside connecting rod big end bore and wrapping crankshaft journal, it builds oil film by engine oil pressure, converts metal contact friction into hydrodynamic lubrication. It bears alternating impact and compression load during power stroke, protects journal and rod bore, and is a mandatory inspection and replacement wearing part during engine overhaul.

Part number: 262-7162
Brand: CAT
Type: connecting rod bearing shell
Thickness (mm): 4.66
Width (mm): 82.5
Processing: steel strip rolling, alloy sintering, semi-circle forming, split precision machining, anti-rust treatment
Matching parts: connecting rod, connecting rod bolt, crankshaft journal, oil cooling nozzle

Advantages:

Reduce friction between the connecting rod and the crankshaft.
The free spread for both the upper and lower halves is 228.4 mm.
Distribute the applied cyclic loads over a relatively wide area.
Support and guide the connecting rod, and connect it to the crankshaft, which moves relative to it.

1. High strength steel back with firmly bonded alloy layer, resistant to peeling under heavy impact
2. Anti-friction alloy optimized for high-pressure oil film, good anti-seizure property and better tolerance for temporary oil shortage
3. Locking tang for reliable positioning, avoids shifting and spinning bearing during operation
4. OEM arc and clearance dimension for stable lubrication and good fit with rod and crankshaft journal

FAQ 

Q: What faults will be caused by damaged connecting rod bearing?
A: Internal engine knocking and low oil pressure. In severe cases, alloy layer melts and seizes the shaft, scoring crankshaft journal and causing serious engine damage.

Q: Can this connecting rod bearing be purchased separately?
A: It can be purchased separately. Full set replacement is recommended for engine overhaul.

Q: Is it recommended to inspect crankshaft journal while replacing bearings?
A: Yes. Check journal roundness and taper. If wear exceeds limit, regrind journal before fitting undersize bearings.

Q: Where does failure usually occur?
A: Alloy friction surface, area around oil hole and tang edge.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us