393-7801 cross link CAT spare part

Short Description:

333-5465 CAT engine connecting rod, fits C4.4 engine. It connects piston and crankshaft, transfers reciprocating power of piston to crankshaft and converts linear motion into rotary torque, serving as core load-bearing part of crank linkage for 312E, 313F, 420F backhoe loaders and other machines.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel. The rod body, big end and small end bores are precision bored. The fractured split design of big end ensures stable positioning accuracy. It is suitable for CAT 312E, 312F, 313F, 314E, 314F, 315F excavators, 416F, 420F, 420F2, 428F, 430F backhoe loaders. The small end connects piston via piston pin, and the big end holds crankshaft journal with connecting rod bearing. It bears alternating impact, tensile and compressive stress during combustion stroke to maintain stable power output of C4.4 engine. It is key overhaul replacement part for C4.4 diesel engine.

Part number: 393-7801
Brand: CAT
Type: stabilizer cross link (Panhard rod)
Fit: 725 / 725C / 725C2 / 730 / 730C / 730C2 / 730 EJECTOR / 735 articulated dump truck
Material: Carbon Steel
Processing: forging, precision boring, stress relief, anti-rust surface treatment
Matching parts: bushing, pin, dust seal, bolt, washer

Advantages:

• Prevents lateral movement and body roll
• Designed to withstand the forces exerted during operation

1. Forged carbon steel body with high rigidity and shear resistance, not easy to bend under heavy haul load
2. Accurate end hole dimension with good coaxiality, uniform force distribution and slower bushing wear
3. Reliable lateral limiting performance, reduces body sway on bumpy road and during turning for safer operation
4. OEM dimension standard, direct replacement, high compatibility with frame bracket, pin and bushing

FAQ 

Q: What faults will be caused by damaged stabilizer cross link?
A: Excessive lateral frame play, obvious body sway during turning and travelling, frame offset while dumping, accelerated pin and bushing wear, and potential hinge structure risk in severe cases.

Q: Can this cross link be purchased separately?
A: It is an individual spare part available for separate purchase and replacement.

Q: Is it recommended to replace bushings and dust seals together?
A: Replacement is recommended. Bushings and seals are exposed to grit and prone to early failure.

Q: Where does failure usually occur?
A: Inner wall of end mounting holes and mid-section bending zone.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us