333-5465 engine connecting rod CAT spare part

Short Description:

251-9836 CAT C-frame bearing cap, two-hole arched clamp cap. It is used on C-frame hinge joints of D6R, D6T series dozers to clamp and limit articulated bearings, restrict axial play and prevent sand and mud from entering the bearing mating area under heavy frame load.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel. The rod body, big end and small end bores are precision bored. The fractured split design of big end ensures stable positioning accuracy. It is suitable for CAT 312E, 312F, 313F, 314E, 314F, 315F excavators, 416F, 420F, 420F2, 428F, 430F backhoe loaders. The small end connects piston via piston pin, and the big end holds crankshaft journal with connecting rod bearing. It bears alternating impact, tensile and compressive stress during combustion stroke to maintain stable power output of C4.4 engine. It is key overhaul replacement part for C4.4 diesel engine.

Part number: 333-5465
Brand: CAT
Type: engine connecting rod
Fit: C4.4 engine, 312E/312F/313F/314E/314F/315F excavator, 416F/420F/428F/430F backhoe loader
Material: Steel
Pin bore diameter: 39.7 mm (1.6 in)
Crankshaft-end diameter: 72.1 mm (2.8 in)
Center-to-center distance: 219 mm (8.6 in)
Processing: die forging, quenching and tempering, precision boring, fractured splitting, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with excellent fatigue resistance, not easy to bend or fracture under continuous heavy-duty combustion impact of C4.4 engine
2. Fractured split surface fits tightly, good coaxiality after assembly and reduces uneven wear of bearing shells
3. Optimized rod cross-section balances load capacity and reduces reciprocating inertia load for smoother engine operation
4. OEM dimension standard, direct replacement, high compatibility with C4.4 crankshaft, piston and bearing shells

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Knocking noise inside engine and low oil pressure. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, causing catastrophic engine damage.

Q: Can this connecting rod be purchased separately?
A: It is an individual assembly part available for separate purchase and replacement.

Q: Is it recommended to replace connecting rod bearings and bolts together?
A: Replacement is recommended. Bearings and bolts are one-time load-bearing wearing parts, old ones carry hidden risk of fatigue fracture.

Q: Where does failure usually occur?
A: Transition fillet of rod body, big end split area and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us