485-5615 linkage bearing bushing CAT spare part

Short Description:

This is Cat linkage bearing bushing for hydraulic link, fitted on link pin of excavator and loader working attachment, carries radial impact load, replacement for worn bushing to keep linkage moving smoothly.


Product Detail

Product Tags

description

Cat 485-5615 linkage bearing bushing is a wear-resistant bucket linkage bushing, paired with 485-5614. It is pressed into link pin bore, separates pin and link body, absorbs impact load during digging and dumping, prevents direct metal friction. It fits boom, stick and bucket linkage of medium Cat excavators, wheel loaders and backhoe loaders, suitable for heavy earthmoving, quarry and aggregate handling. Made of precision machined wear-resistant alloy with grease groove, it is standard replacement when bushing is scratched, loose or seized, to eliminate linkage play and shaking.

Product Name: Linkage Bearing Bushing
Part Number: 485-5615
Process: Precision machined with grease groove
Material: Steel Backed Copper-Lead Bearing
Accessories: Link, pin and seals not included

Advantages:

1. Wear-resistant alloy, impact resistant for frequent bucket tilting load
2. Internal grease groove holds lubricant steadily for continuous oil film
3. Accurate outer diameter tolerance, tight press fit against bore, anti-rotation
4. Smooth inner surface for low friction pin movement
5. Standard OEM dimension, interchangeable as matched pair, no reaming needed
6. Common matched spare part for attachment repair, stable supply

• Lubricating oil ensures smooth operation.
• Resists wear, extending bearing life.
• Improves engine efficiency.

FAQ 

Q: Does this bearing include link and pin?
A: No, only bushing. Link, pin and seals are sold separately.

Q: Must 485-5614 and 485-5615 be replaced together?
A: They are matched bushings. Pair replacement is recommended to avoid uneven wear.

Q: Can slightly scratched bushing keep working?
A: Not recommended. It will cause excessive play and shaking quickly.

Q: Why pin is tight after bushing pressing?
A: Misaligned bushing, deformation or out-of-round bore will cause binding.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us