383-0374 engine connecting rod CAT spare part

Short Description:

8N-1726 CAT engine connecting rod, fits 3406, 3408, 3412, C15, C16 engines with 9° wide taper design. It transfers combustion thrust from piston to crankshaft and converts reciprocating linear motion into rotary torque, serving as core load-bearing component for heavy-duty trucks, large wheel loaders and generator sets.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel. The rod body, big end and small end bores are precision bored. The fractured split design of big end ensures stable positioning accuracy. It is suitable for CAT 303.5E, 303.5E2 CR, 304E, 304E2 CR, 305E, 305E2 CR, 305.5E, 305.5E2 CR mini excavators, 901C, 902C, 903D compact wheel loaders equipped with C1.1 / C1.6 engine. The small end with bushing connects piston via piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for C1.1 / C1.6 diesel engine.

Part number: 383-0374
Brand: CAT
Type: engine connecting rod
Fit: C1.1, C1.6 engine, 303.5E2/304E2/305.5E2 mini excavator, 901C/902C compact loader
Material: alloy steel
Processing: die forging, quenching and tempering, precision boring, fractured splitting, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

• Manufactured from high-strength steel.
• Capable of withstanding applied forces and stresses.

The connecting rod transmits the reciprocating motion of the piston to the crankshaft, generating the rotational motion required to deliver power. Widely used in Cat 3.04E, 303.5E, 304.5E, 304E, 305.5E, 305E, 306, 306E, and 307E excavators, as well as 901C, 902C, 903C, and 903D wheel loaders.

1. Forged alloy steel base with a compact structure and excellent fatigue resistance, suitable for the continuous operation of compact construction machinery.
2. Fractured split surface ensures a tight fit and high coaxiality upon assembly, reducing uneven bearing wear.
3. Lightweight rod design lowers reciprocating inertial forces, resulting in smoother engine operation and stable fuel consumption.
4. Built to OEM dimensional standards, ensuring full compatibility with C1.1/C1.6 crankshafts, piston pins, and bearing shells.

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise, low oil pressure and power loss. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure usually occur?
A: Transition fillet of rod body, big end split area and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us