514-7719 piston connecting rod assembly CAT spare part

Short Description:

389-5181 CAT connecting rod bearing, sliding bearing shell for connecting rod big end. It is installed between connecting rod and crankshaft journal, forms hydrodynamic oil film with engine oil, withstands combustion impact load and reduces friction wear, serving as key wear-resistant part for engine overhaul.


Product Detail

Product Tags

description

This CAT piston connecting rod assembly adopts forged alloy steel connecting rod and high-silicon aluminum piston. The connecting rod big end is fractured split design, pre-assembled with piston pin bushing, locking tang bearing shells. It fits CAT heavy-duty diesel engines. Installed between cylinder and crankshaft, it transmits combustion pressure to crankshaft. It endures high temperature, alternating impact, tension and compression loads, guides piston movement and maintains cylinder sealing. It is a critical assembly for engine overhaul, cylinder scoring and shaft seizure repair.

Part number: 514-7719
Brand: CAT
Type: piston connecting rod assembly
Materials: Carbon steel, anti-corrosion oil
Processing: die forging, quenching and tempering, precision piston casting, boring & honing, surface wear-resistant treatment
Matching parts: piston ring, connecting rod bolt, crankshaft, cylinder liner, cooling nozzle

Advantages:

1. Check piston crown, skirt and rod body for cracks, scratches and burning. Replace the whole assembly if damaged
2. Fully clean oil passages, remove burrs, carbon and sludge on liner and crank journal before installation
3. Piston pin and connecting rod bolts are single-use parts, must be renewed for overhaul and tightened step by step to specified torque
4. Check piston clearance and rod side clearance after assembly, monitor oil pressure, exhaust and abnormal noise on test run

FAQ 

Q: What faults will be caused by damaged piston connecting rod assembly?
A: Power loss, black smoke, loud internal knocking and abnormal oil pressure. In severe cases, piston seizure or broken rod will crack the cylinder block.

Q: Can this piston connecting rod assembly be purchased separately?
A: It can be purchased separately. Full set replacement for the same cylinder is recommended in overhaul to avoid uneven load.

Q: Is it recommended to replace piston rings together?
A: Yes. Worn old rings lead to poor sealing, blow-by and oil consumption.

Q: Where does failure usually occur?
A: Piston skirt, piston pin bore, connecting rod transition fillet and bearing alloy layer.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us