5I-7668 engine connecting rod CAT spare part

Short Description:

383-0374 CAT engine connecting rod, fits C1.1, C1.6 engines. It transfers combustion thrust from piston to crankshaft and converts reciprocating linear motion into rotary torque, serving as core load-bearing component for 303.5E2, 304E2, 305.5E2 mini excavators and 901C compact loaders.


Product Detail

Product Tags

description

This CAT connecting rod is die-forged from high-quality alloy steel with center length of 262.4 mm and offset split big end design. The rod body, big end and small end bores are precision bored. It is suitable for CAT 3064, 3066, C6.4, S6K diesel engines. It fits 311C, 312C, 319C, 320B, 320C, 320D, 321C, 323DL excavators. The small end with bushing connects piston via piston pin, and the big end with bearing shells wraps crankshaft journal. It bears alternating impact, tensile and compressive stress during combustion stroke, and is key overhaul replacement part for C6.4 / 3066 diesel engine.

Part number: 5I-7668
Brand: CAT
Type: engine connecting rod
Center length: 262.4 mm
Fit: 3064, 3066, C6.4, S6K engine, 311C/312C/320B/320C/320D excavator
Material: alloy steel
Processing: die forging, quenching and tempering, precision boring, offset split machining, oil passage cleaning, anti-rust surface treatment
Matching parts: connecting rod bearing, piston pin, piston pin bushing, connecting rod bolt, rod cap

Advantages:

1. Forged alloy steel base with quenching and tempering treatment, high fatigue strength for long-time heavy load of C6.4 excavator engine
2. Standard center length 262.4 mm with OEM precision, ensures stable piston stroke and steady power output
3. Offset split design for easy disassembly, tight joint surface and reduces uneven bearing wear
4. Good interchangeability, compatible with matched crankshaft, piston pin and bearing shells

• Provide sufficient strength and rigidity to withstand combustion forces and repetitive load cycles.
• Ensure smooth operation and minimize friction.
• Reduce friction between the connecting rod and the crankshaft.

FAQ 

Q: What faults will be caused by damaged connecting rod?
A: Connecting rod knocking noise, low oil pressure and power loss. In severe cases, broken rod penetrates cylinder block and destroys crankshaft, leading to total engine failure.

Q: Can this connecting rod be purchased separately?
A: It can be purchased separately. Replace rod, bearings and bolts together for the same cylinder during overhaul.

Q: Is it recommended to replace connecting rod bearings together?
A: Yes. Worn old bearings have excessive clearance and may cause bearing seizure.

Q: Where does failure usually occur?
A: Transition fillet of rod body, big end split area and stress zone of bolt holes.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us