7C-6697 idler drive shaft CAT spare part

Short Description:

433-3495 Cat air shutoff shaft, fitted on engine air shutoff valve assembly, rotates to actuate shutoff flap, cuts off intake air for emergency engine shutdown and explosion protection.


Product Detail

Product Tags

description

This idler drive shaft fits Caterpillar 3406, 3406B, 3406C and G3406 engines. It is forged alloy steel with quenched and tempered treatment, precision ground surface and internal oil passage. It is installed in timing gear housing. It supports idler gear and transfers power to adjust transmission path, stabilizes timing between crankshaft and camshaft. It is widely used on generator sets, marine engines, off-highway trucks and dozers with 3406 power. It is replacement part for gear housing overhaul and repair of noisy or out-of-tolerance gear sets.

Part Number:7C-6697
Name:Idler Drive Shaft
Outer Diameter:158.75 mm
Height (mm): 68.62
Length (mm): 409.6
Material: Cast iron
Outer diameter (mm): 158.75
Weight (kg): 2.47
Structure:With internal oil passage, precision ground shaft surface
Fit Engine:3406,3406B,3406C,G3406

Advantages

1. Forged alloy steel with surface hardening, good wear and fatigue resistance, resistant to bending and fracture under cyclic gear load.
2. Internal oil passage supplies pressurized lube oil to shaft and bushing interface to prevent seizure.
3. Precision machined diameter with good concentricity, smooth idler rotation and reduced gear noise and uneven wear.
4. OEM dimension for direct replacement, keeps correct timing and gear ratio for 3406 series engines.

FAQ 

Q:Can slightly scored idler drive shaft stay in service?
A:Not recommended. Scoring accelerates bushing wear, causes excessive backlash and timing jump, leading to valve timing failure.

Q:Must I replace bushing with idler drive shaft?
A:Recommended. Shaft and bushing form friction pair. Old bushing with new shaft causes abnormal clearance.

Q:What failure will blocked oil passage cause?
A:Loss of lubrication leads to rapid seizure of shaft and bushing and broken timing gears.

Q:Can idler shafts with same outer diameter interchange?
A:No. Total length, oil hole position and locating structure differ, wrong fit causes timing failure.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us