801103668 oil cup m8×1 for XCMG RP705 paver spare parts

801103668 oil cup m8×1 for XCMG RP705 paver spare parts Featured Image
  • 801103668 oil cup m8×1 for XCMG RP705 paver spare parts

Short Description:

Grease Nipple, Part No. 801103668, Specification M8×1, fits XCMG RP705 medium crawler paver. It is a lubrication fitting mounted on pin shafts, bushings, hinge points and sliding supports.

Product Detail

Product Tags

description

This M8×1 grease nipple is manufactured to OEM standards with precise thread pitch for direct installation into designated lubrication holes. Made of high‑quality steel with zinc‑plated anti‑rust finish, it incorporates a one‑way check ball and spring. The valve closes automatically after greasing to prevent backflow and keep asphalt debris and silt out of the lubrication channel. Regular greasing through this fitting extends the service life of hinge pins and bushings during continuous paving operations. It serves as OEM replacement when the original nipple is clogged, damaged, stripped or seized by rust, an essential lubrication fitting for hinges and undercarriage.

product parameters

- Part Name: Grease Nipple
- Part No.: 801103668
- Specification: M8×1
- Compatible Model: XCMG RP705 medium crawler paver
- Material: High‑quality carbon steel
- Process: Machining, ball and spring assembly, zinc plating and passivation
- Built‑in Structure: Threaded base, check ball, return spring, grease inlet tip
- Function: Grease filling, one‑way sealing and protection of hinge friction pairs

Applicable Scenarios

Suitable for routine maintenance and repair of XCMG RP705 crawler paver; replacement of clogged or damaged grease nipples on hinge joints, sliding supports, pins and bushings; spare fitting for paving equipment maintenance; lubrication stock for construction parts suppliers.

advantage

- OEM thread specification: M8×1 fine thread perfectly matches the machine’s lubrication holes for smooth fitting.
- One‑way sealing structure: Built‑in ball and spring automatically seal after greasing to avoid grease backflow.
- Zinc anti‑rust coating: Resists mud, water and asphalt dust to reduce seizure.
- Universal coupling: Compatible with standard grease gun nozzles for easy lubrication.
- Compact size: Fits confined hinge spaces for convenient installation.
- Low maintenance cost: Simple replacement protects expensive pins and bushings.

FAQ 

Q: Can grease nipple 801103668 fit other construction machinery?
A: It can be used on other machines with M8×1 fine thread lubrication holes. It is primarily an OEM replacement for the XCMG RP705.

Q: Must a clogged nipple be replaced?
A: Light blockage can be cleaned; replacement is recommended if the ball sticks, the tip breaks or threads corrode.

Q: What should be noted during installation?
A: Clean debris out of the threaded hole, screw it in gently without over‑torqueing, and verify that the grease gun works properly.

Q: Are straight and angled nipples interchangeable?
A: This is a straight nipple. An angled nipple of the same thread size can be used if the fitting is blocked by surrounding structures.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories