805046846 BOLT M8×65 XCMG D360 Tracked Bulldozer spare parts

Short Description:

BOLT M8×65 is a general‑purpose fastener for bulldozer. It secures sheet‑metal guards, brackets and accessory assemblies to prevent component displacement caused by machine vibration.

Send email to us

Product Detail

Product Tags

description

Part number:805046846
Part name:BOLT M8×65
Unit name:382205671 Pipe clamp18
Fit for XCMG bulldozer D360, suitable for mining, earth‑moving dozing and site leveling. Used to replace original BOLT M8×65 with thread damage and tensile deformation.

Stripped thread, stretched shank and cracked bolt head will lead to loose connection and component offset, trigger abnormal vibration noise, and even part falling‑off in serious cases, endangering bulldozer operation safety.

*Due to the wide variety of products, the pictures displayed may not match the actual ones, and the part numbers are mainly used.

Item No./Factory drawing number/Part Name/Remark

1 805046846 2 BOLT M8×65 БОЛТ M8×65
2 329900301 2 THICK FLAT WASHER ТОЛСТАЯ ПЛОСКАЯ ШАЙБА
3 382205707 1 PIPE CLAMP 18-2 ХОМУТ ДЛЯ ТРУБ18-2
4 382205713 2 PIPE CLAMP 18-1 ХОМУТ ДЛЯ ТРУБ18-1

====================================================

advantages

Standard size M8×65 with qualified thread precision, good interchangeability for direct replacement without secondary processing.
High‑strength material with heat‑treatment delivers excellent tensile and shear resistance, adapts to heavy‑vibration working condition of bulldozer.
Uniform regular thread cooperates with washers for stable locking and anti‑loosening performance.
Standard fastener for construction machinery, convenient for bulk stocking and quick on‑site installation, meet spare‑parts stocking demand for overseas projects in Southeast Asia and Africa.

maintenance & replacement

Inspect complete thread free of burr and bump damage before installation, clean impurities inside screw hole.
Use matched washers, tighten with specified torque. Over‑torque twisting is forbidden to avoid shank stretching and thread stripping.
Anti‑loosening measures are recommended for high‑vibration positions. Do not reuse stretched deformed old bolts.
Recheck locking condition after assembly, observe looseness during machine trial run.
Do not repair and reuse stretched, thread‑damaged or head‑cracked bolt, replace BOLT M8×65 directly.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.