805048032 bolt m16×25 for XCMG RP705 paver spare parts

805048032 bolt m16×25 for XCMG RP705 paver spare parts Featured Image
  • 805048032 bolt m16×25 for XCMG RP705 paver spare parts

Short Description:

Bolt, Part No. 805048032, Size M16×25, fits XCMG RP705 medium crawler paver. It is a high‑strength externally threaded fastener, widely used for valve block bases, pipe flanges, bearing retainers, guard plates, limit brackets and small supports to clamp and fasten components together.

Product Detail

Product Tags

description

This M16×25 high‑strength bolt is manufactured to OEM standards. Thread precision, shank length, hex head and wrench flats meet original assembly requirements, and it can be matched with corresponding nuts, plain washers and spring washers. Made of premium alloy steel with quenching and tempering, it delivers high tensile strength and reliable resistance to alternating loads. Rolled threads feature full profile and smooth surface to resist stripping and seizure. The anti‑rust coating protects against mud, water and asphalt dust on construction sites. It serves as OEM replacement for corroded, stripped, stretched or broken original bolts, a common standard fastener for paver service, hydraulic overhaul and machine rebuild.

product parameters

- Part Name: Bolt
- Part No.: 805048032
- Size: M16×25
- Compatible Model: XCMG RP705 medium crawler paver
- Material: Alloy structural steel
- Process: Thread rolling, quenching and tempering, anti‑rust surface treatment
- Built‑in Structure: Hex head, threaded shank, lead chamfer
- Function: Fasten covers, flanges, supports and valve blocks, withstand tension and shear loads and prevent component displacement

Applicable Scenarios

Suitable for maintenance and overhaul of hydraulic valve assemblies, flange joints, bearing retainers, guards and limit supports on XCMG RP705 crawler paver; replacement of failed original M16×25 bolts; standard fastener for asphalt paving machinery; short M16 bolt stocked by construction parts suppliers.

advantage

- OEM standard dimension: Accurate M16×25 size with stable thread tolerance and excellent interchangeability.
- Tempered high‑strength substrate: Outstanding tensile and fatigue resistance for long‑term vibration service.
- Rolled thread profile: Continuous metal grain improves wear resistance and anti‑stripping performance.
- Anti‑corrosion finish: Minimizes rust caused by mud and asphalt dust and reduces thread seizure.
- Standard hex head: Fits common sockets for easy on‑site installation.
- Good compatibility: Works with matched nuts, plain washers and lock washers for locking and sealing.

FAQ

Q: Can bolt 805048032, M16×25 be used on other construction machines?
A: It can be substituted if grip length, strength grade and load match. It is primarily an OEM replacement for the XCMG RP705.

Q: Can a bolt with light surface rust and intact threads stay in use?
A: It may be used temporarily after cleaning if no thread damage or cracks are found. Replace it if threads are galled or shank stretched.

Q: What should be noted during installation?
A: Clean asphalt and debris from threads before assembly, tighten flanges and valve blocks diagonally to specified torque, and apply lock washers or thread locker for high‑vibration positions.

Q: What commonly causes failure of this short bolt?
A: Typical causes include over‑torque, insufficient preload with cyclic impact, corroded threads or substitution with low‑grade bolts.

Q: Can high‑strength bolts be reused after disassembly?
A: Repeated reuse is not recommended if the bolt has carried heavy preload and impact. Replace it immediately once deformation or corrosion appears during inspection.

 

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories