805338331 washer for XCMG RP705 paver spare parts

805338331 washer for XCMG RP705 paver spare parts Featured Image
  • 805338331 washer for XCMG RP705 paver spare parts

Short Description:

Washer 8, Part No.: 805338331, fits XCMG RP705 medium crawler paver. It is a standard flat washer for construction machinery.

Product Detail

Product Tags

description

This size 8 flat washer is an OEM standard part for XCMG. Stamped from high-quality carbon steel, it features flat surface and consistent thickness and resists distortion under load. The anti-corrosion surface treatment protects it from muddy water and asphalt dust on site. Placed under bolt heads or nuts, it spreads concentrated pressure to prevent denting or cracking of brackets and sheet metal. It reduces loosening caused by local stress and works with high-strength bolts to extend service life of fasteners and connected components.

product parameters

- Part Number: 805338331
- Name: Washer 8
- Size: Flat washer for M8
- Applicable Model: XCMG RP705 medium crawler paver
- Material: High-quality carbon structural steel
- Process: Stamping, deburring, anti-corrosion treatment
- Matching Parts: M8 bolt, nut
- Function: Distribute clamping load, protect workpiece surface, assist anti-loosening

Applicable Scenarios

It is widely used with M8 bolts for guards, baffles, support plates and small brackets on XCMG RP705 paver.

advantage

- Original factory standard size, precise hole diameter, outer diameter, and thickness, compatible with M8 fasteners.
- The board surface is flat, the stress is evenly distributed, and it is not easily crushed or deformed.
- Rust-proof technology, suitable for humid and dusty construction site environments.
- The edges are sanded smooth to avoid cutting the gasket and the substrate.
- Highly versatile, easy to assemble and disassemble, suitable for bulk stocking.
- Low cost, easy to repair and replace

FAQ

Q: Can a lightly rusted washer keep working?
A: It can be used temporarily with only light rust and no deformation or cracks. Replace it if heavily corroded, warped or split.

Q: Is there a front or back side for installation?
A: This flat washer has no direction. Place the flat side against the workpiece. If using with a spring washer, put the flat washer next to the part.

Q: Can I tighten the bolt without a washer?
A: Not recommended. Direct pressure easily dents thin plates and increases loosening risk.

Q: What troubles are caused by failed washers?
A: Concentrated load damages plates, and connections tend to loosen under vibration, leading to rattling guards and baffles.

Q: Should washers be replaced together with bolts?
A: Intact flat washers can be reused. Replace crushed or heavily rusted ones.

our warehouse

our warehouse

Pack and ship

Pack and ship


  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories