860512809 Piston rod XCMG XE60GPro Hydraulic Excavator spare parts

Short Description:

Fit for XCMG excavator XE60GPro, suitable for municipal earth‑moving and small‑scale excavation, adapt to dusty sites with sand and gravel. Used to replace original piston rod with scratched coating, rust pitting and impact deformation.

Send email to us

Product Detail

Product Tags

description

Part number:860512809
Part name:Piston rod
Unit name:803076106 Foot Valve
Applicable Models: XCMG XE60GPro Hydraulic Excavator

Piston rod is the core moving part of excavator hydraulic cylinder. It cooperates with cylinder tube and seals to realize telescopic movement, transmit thrust and pull force for boom, stick and bucket operation. Scratched coating, rust and impact pit will cause rapid oil‑seal wear, resulting in cylinder external leakage and insufficient pressure‑holding capacity, which directly affects excavation stability.

*Due to the wide variety of products, the pictures displayed may not match the actual ones, and the part numbers are mainly used.

Item No./Factory drawing number/Part Name/Remark

1 860205555 Valve Core
2 860512809 Piston rod
3 860205560 O-ring
4 860205562 Copper Sleeve
5 860205563 U-shaped ring
6 860512811 Dust Cover

====================================================

advantages

Outer diameter, thread specification and hinge dimension are consistent with original part for direct installation without secondary processing.
Uniform and compact hard surface coating delivers good wear and corrosion resistance against sand‑gravel friction and impact.
High straight‑ness reduces partial wear on oil seal during movement and extends service life of seal kit.
Finished single part facilitates on‑site cylinder repair and replacement, reduces maintenance man‑hours.

FAQ

Q: Can piston rod with slight scratch keep using after polishing?
A: Minor scratch without coating damage is allowed for temporary test. If coating is penetrated, oil leakage will recur soon, replacement is recommended.
Q: Why cylinder still leaks oil after new piston rod installed?
A: Check inner‑wall scratch of cylinder tube, confirm correct seal installation and inspect guide sleeve wear.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.