8944189211 cylinder head gasket for ISUZU engine spare part

Short Description:

Cylinder head gasket for Isuzu 4BE1 engine, seals between cylinder head and block, isolates combustion gas, oil and coolant to prevent gasket blowout, water and oil leakage.

Product Detail

Product Tags

description

The cylinder head gasket is the critical sealing component between cylinder head and block. It separates combustion chamber, water passages and oil galleries and withstands high temperature and pressure to avoid cross leakage. Eroded, broken or delaminated gasket causes gas cross leakage, oil and water mixing, high temperature, power loss and white smoke. Severe failure leads to no-start.

Part No.: 8944189211
Part Name: cylinder head gasket
Matching Engine: Isuzu 4BE1
Installation Position: Mating surface between cylinder head and engine block
Matching Parts: cylinder head bolt, overhaul gasket kit, valve assembly selected as overhaul set on demand

Application Scenarios

Fit for Isuzu 4BE1 series engines, compatible with Isuzu NPR light trucks and small construction machinery. Suitable for urban freight and site operation conditions. Replaced during overhaul or after gasket blowout failure.

Maintenance & Replacement Tips 

Grind and clean mating surfaces of cylinder head and block before installation, check flatness.
Resurface or replace head if warped out of tolerance.
Align all water and oil holes, blockage is forbidden.
Confirm gasket marking and orientation before fitting, reverse installation is not allowed.
Tighten cylinder head bolts diagonally step by step following OEM torque sequence, do not fasten fully at one time.
Check piston and injector condition if gasket fails.
Replace head bolts once reaching service limit.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us