9F-3788 metal seal ring for CAT bulldozer spare part

Short Description:

Metal lock-type seal ring for Caterpillar D8L/D9N/D9R bulldozer final drive planetary assembly, inner diameter 113.53mm, outer diameter 120.65mm, fills flange gap to retain gear oil and block contaminants entering planetary set.

Product Detail

Product Tags

description

Metal lock-type seal ring is static sealing part for planetary flange of final drive. It fills joint gap by precise cast iron fit, withstands pressure of transmission section, prevents gear oil leakage and stops sand and metal debris entering gear meshing zone. Deformation, notch, surface wear and crushing will lead to oil seepage. Continuous oil loss causes insufficient lubrication for planet gears and bearings, resulting in tooth breakage and seizure.

Part No.:9F-3788
Type: Metal lock-type seal ring
Material: Gray cast iron
Inner Diameter:113.53 mm
Outer Diameter:120.65 mm
Width:3.14 mm
Thickness:3.56 mm
Sealing Type: Static flange sealing
Sealing Medium: Gear oil
Working Condition: Heavy load low speed for bulldozer final drive
Matching System: Final drive planetary reduction assembly

Application Scenarios

Fits Caterpillar D8L, D9N, D9R track-type tractor and 589 pipelayer, installed inside final drive planetary reduction assembly as the input driving gear.

FAQ 

Q:Can slightly worn metal seal ring be reused?
A:Not recommended. Wear increases clearance, causes oil leakage and lets metal debris enter planetary gears.

Q:What happens if the ring is tilted during installation?
A:Uneven load leads to partial crushing and cracking, oil leakage occurs quickly.

Q:Can this metal lock ring be disassembled and reused?
A:Not recommended. Flatness is damaged after removal, sealing reliability drops.

Q:Will new seal work if flange surface is uneven?
A:Poor effect. Distorted flange creates local gap and re-leakage, repair flange surface first.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us