9M-1503 metal seal ring for CAT bulldozer spare part

Short Description:

Metal lock-type seal ring for Caterpillar D8L/D9N/D9R bulldozer final drive flange, outer diameter 177.8 mm with rectangular hook, seals joint surface, retains gear oil and blocks dirt entering planetary assembly.

Product Detail

Product Tags

description

Metal lock-type seal ring is precision static seal for final drive planetary flange. It fills flange gap by cast iron fit and hook structure, withstands oil pressure of transmission section, prevents gear oil leakage and stops sand and metal debris entering gear meshing zone. Deformation, notch, surface wear and crushing will lead to oil seepage. Continuous oil loss causes insufficient lubrication for planet gears and bearings, resulting in tooth breakage and seizure.

Part No.:9M-1503
Type: Metal lock-type seal ring
Material: Gray cast iron
Outer Diameter:177.8 mm
Thickness:3.14 mm
Structure: Split ring with rectangular hook
Sealing Type: Static flange sealing
Sealing Medium: Gear oil
Working Condition: Heavy load low speed for bulldozer final drive
Matching System: Final drive planetary reduction assembly

Application Scenarios

Fits Caterpillar D8L, D9N, D9R track-type tractor, installed on flange of final drive planetary reduction assembly, for planetary overhaul service.

FAQ 

Q:Can slightly worn metal seal ring be reused?
A:Not recommended. Wear increases clearance, causes oil leakage and lets metal debris enter planetary gears.

Q:What happens if the ring is tilted during installation?
A:Uneven load leads to partial crushing and cracking, oil leakage occurs quickly.

Q:Can this metal lock ring be disassembled and reused?
A:Not recommended. Flatness is damaged after removal, sealing reliability drops.

Q:Will new seal work if flange surface is uneven?
A:Poor effect. Distorted flange creates local gap and re-leakage, repair flange surface first.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us