B229900000862 Grease Valve Sany SY1350C1C3KH Tracked hydraulic excavator spare parts

Short Description:

B229900000862 Grease Valve is key fitting of lubrication system for Sany SY1350C1C3KH large excavator. It is installed on each lubricating point and connected with grease gun to inject grease into friction pairs such as pin shafts and bushings for reducing abrasion of hinge positions. Timely replacement is required in case of valve blockage, spool sticking, thread damage and oil leakage & pressure relief at filling position, so as to avoid rapid burning‑wear of hinge pins caused by insufficient lubrication.

Send email to us

Product Detail

Product Tags

description

Part number:B229900000862
Part name:Grease Valve
Unit name:131903010001A Tensioning Device
Applicable Models: SANY SY1350C1C3KH Tracked hydraulic excavator

Compatible with Sany Excavator SY1350C1C3KH. Suitable for high‑load working conditions including open‑pit mining, earth‑rock stripping, heavy‑load loading and excavation on gravel‑mud site. Applied for poor grease injection at hinge lubricating points, blocked & leaking grease valve, lubricating‑fitting replacement during undercarriage & working‑device maintenance. Fit for original spare‑part replacement, open‑pit mine project maintenance in Middle East and Southeast Asia, lubricating‑point service for working device and undercarriage of SY1350C1C3KH excavator.

*Due to the wide variety of products, the pictures displayed may not match the actual ones, and the part numbers are mainly used.

Item No./Factory drawing number/Part Name/Remark

1 131903010007B001 Tensioning Repair Kit
2 A820101010372 Support plate
3 24000639 Washer
4 A210111000101 Bolts
5 B229900000862 Grease Valve

====================================================

advantages

High‑quality alloy valve body with pressure‑resistance and impact‑resistance, resist rust and sticking under mine‑dust environment
Thread specification fully matches OEM mounting hole with good interchangeability for direct screw‑in installation on site
Built‑in one‑way spool structure prevents grease backflow and pressure relief after filling and keeps oil film on friction position
Compact size, convenient for installation in narrow hinge space, meet frequent greasing requirement of large excavator.

FAQ

Q: Can slightly‑blocked grease valve be reused after dredging?
A: Spool tends to stick and fail again under mine‑dust condition. New‑valve replacement is recommended for overhaul maintenance.
Q: What should be checked firstly for grease leakage after new grease‑valve installation?
A: Inspect insufficient screw‑in torque, foreign matter inside thread hole and damaged valve thread first, reassemble after troubleshooting.

warehouse

We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.