Battery 803754864 truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.


Product Detail

Product Tags

description

Part No: 803754864
Part name: Battery
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers:

805604502 PY180G.29.1-2 pin
805604631 GB/T91-2000 pin 6×65
819911318 Guide ring 4642308084 (Hang tooth)
276100559 LQC80B.5.1.3-7 Liner (seven)
276100577 LQC80B.5.1-15 Inner sealing frame
276601748 XAP320.02.5.4.1-1 serrated feeding claw
276609449 XAP320.5-2Ⅱ Hook M12
380600516 GR180Ⅲ.01-16 Connector
380602150 GR180BR.21-2 Lifting Diagram
380602151 GR180BR.21-3 Lubrication diagram
380602547 GR180DⅤ cab base assembly (BR)
380700436 GR185.01.1 Drive shaft (spare part)
380900728 XGYG07-099 Front Bulldozer Cylinder
380900729 XGYG07-100 Rear ripper lift cylinder
380900865 GR215.29.2-2 traction pin
380901047 GR215Ⅹ.14.2.1-15 limit plate
380901293 φ6×1 Sub-tube
380903656 GR215Ⅹ.13-1/-2A Up and down swing frame
380904073 GR215K.09-2 connecting rod
380904074 GR215K.09-3 Rubber sleeve
380905101 GR215DⅡ.18-2 Rubber pad
380905167 GR215BR.09.4-1 handle ball
387200538 XC300L.05-25 stirring knife
387500520 XC800.05Ⅱ.10 Shaft Sheath
390100998 20.5-25TL tire
393100171 WB21K.19Ⅱ.1-3 Bullet cutter bar Ⅱ
800106667 0730003500 Adjusting gasket (Hangtooth)
800106668 0730003502 Adjusting shim S=0.6 (Hang tooth)
800106669 0730003503 Adjusting shim S=0.8 (Hang tooth)
800152051 Diesel filter (coarse) VG1540080110
800152052 Air filter K3046
800152357 Diesel filter (fine) VG1095540156
800153510 612630060011 Generator drive belt
800309266 BG10B.5.3.1C rear wheel

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts!

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

Our warehouse

Our warehouse

Pack and ship

Pack and ship

  • Previous:
  • Next:

  • Write your message here and send it to us