Composite bushing 80×85×25 for XCMG RP705 paver spare parts

Short Description:

Air bleed bolt is a special fastener for exhausting paver hydraulic cylinders. It removes trapped air inside cylinder chambers to eliminate jitter and crawling of cylinder movement.

Product Detail

Product Tags

description

This composite bushing is sized 80×85×25, adopting three-layer composite structure: steel backing, sintered bronze intermediate layer and PTFE self-lubricating surface layer. It features high load capacity and low friction coefficient, suitable for dry or oil lubricated conditions. It is press-fitted into hinge housing bore. The pin slides or oscillates inside the bushing to prevent metal seizure and scratching. Widely used on paver track frame, cylinder lugs and connecting hinges. It is low-maintenance and commonly replaced during chassis overhaul.

product parameters

Product Name:Composite Bushing 80×85×25
Dimension:80×85×25 (ID×OD×Length)
Material:Steel backing + sintered bronze + PTFE self-lubricating layer
Structure:3-layer self-lubricating composite bushing
Motion Type:Oscillation, reciprocating sliding
Applicable Model:XCMG RP705 medium crawler paver

Applicable Scenarios

Suitable for paver track frame hinges, cylinder lugs, connecting pins and swing supports, acting as sliding bearing to bear radial load and reduce pin wear.

advantage

▪ 3-layer composite structure, high load capacity for heavy-load hinge positions
▪ PTFE self-lubricating surface, anti-seize and anti-burning under dry friction
▪ Low friction coefficient, smooth oscillation and less abnormal noise
▪ Thin-wall design, press-fit installation for limited space
▪ Sand and impact resistant, reliable for rough construction site conditions

FAQ

Q:How to install composite bushing?
A:Press fit into housing bore. Do not hammer the sliding surface to avoid damage of PTFE layer.

Q:Is grease lubrication required?
A:Self-lubricating type can run dry. Grease filling will extend service life under heavy load.

Q:What are signs of worn bushing?
A:Excessive hinge clearance, shaking mechanism and abnormal noise, even pin seizure in severe cases.

Q:Composite bushing vs solid bronze bushing?
A:Composite bushing has self-lubricating layer with lower friction and less maintenance. Bronze bushing needs continuous lubrication.

Q:Can scratched inner surface be reused?
A:Peeled PTFE layer or deep scratches cause high friction and seizure risk, replace it.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us