Factory Supply PC78US-6 hydraulic pump - Pilot control valve for truck crane spare parts – CCMIC

Pilot control valve

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones

Advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

A pilot control valve, which mainly includes a valve body, a valve core, a valve cover, etc., is characterized in that: the valve core part is composed of a lower floating plug, an upper floating plug, an inner magnet, an outer magnet, a valve needle and a seal, and the lower floating plug and The seal with a through hole in the center is matched into a whole. The upper floating plug and the lower floating plug are connected by screw mosquitoes. The upper floating plug has a through hole that can pass through the valve needle. The front end of the valve needle is matched with the through hole of the sealing member and has a lift. The tapered needle tip of the wing, the end of the valve needle is provided with an inner magnet matched with the outer magnet, and the valve needle is provided with a channel through which fluid can pass along the axial direction.

The hoisting mechanism vibrates during hoisting. During hoisting, it is found that the reel stops while rotating, and cannot work continuously, and there is obvious vibration. When the engine throttle is increased, the fault remains, and the engine is holding the car. After measurement, in the hydraulic oil circuit of the lifting mechanism, the control oil pressure entering the brake piston before the throttle valve is normal (1.5-1.8MPa). Secondly, the possibility of the lifting balance valve being stuck by dirt is eliminated. Finally, it is judged that the one-way throttle valve of the brake oil circuit may be blocked. Disassembly and inspection of the one-way throttle valve found that the 0.6mm orifice on the valve core has been blocked by dirt, making the pressure entering the brake piston after the throttle valve. The oil is throttled and the pressure is lower than 1.8MPa, and the brake piston cannot be fully opened. After the dirt is removed, the lifting mechanism returns to normal.

our warehouse

Pack and ship

• Aerial Boom Lift
• China Dump Truck
• Cold Recycler
• Cone Crusher Liner
• Container Side Lifter
• Dadi Bulldozer Part
• Forklift Sweeper Attachment
• Hbxg Bulldozer Parts
• Howo Engine Parts
• Hyundai Excavator Hydraulic Pump
• Komatsu Bulldozer Parts
• Komatsu Excavator Gear Shaft
• Komatsu Pc300-7 Excavator Hydraulic Pump
• Liugong Bulldozer Parts
• Sany Concrete Pump Spare Parts
• Sany Excavator Spare Parts
• Shacman Engine Parts
• Shantui Bulldozer Clutch Shaft
• Shantui Bulldozer Connecting Shaft Pin
• Shantui Bulldozer Control Flexible Shaft
• Shantui Bulldozer Flexible Shaft
• Shantui Bulldozer Lifting Cylinder Repair Kit
• Shantui Bulldozer Parts
• Shantui Bulldozer Reel Shaft
• Shantui Bulldozer Reverse Gear Shaft
• Shantui Bulldozer Spare Parts
• Shantui Bulldozer Winch Drive Shaft
• Shantui Dozer Bolt
• Shantui Dozer Front Idler
• Shantui Dozer Tilt Cylinder Repair Kit
• Shantui Sd16 Bevel Gear
• Shantui Sd16 Brake Lining
• Shantui Sd16 Door Assembly
• Shantui Sd16 O-Ring
• Shantui Sd16 Track Roller
• Shantui Sd22 Bearing Sleeve
• Shantui Sd22 Friction Disc
• Shantui Sd32 Track Roller
• Sinotruk Engine Parts
• Tow Truck
• Xcmg Bulldozer Parts
• Xcmg Bulldozer Spare Parts
• Xcmg Hydraulic Lock
• Xcmg Transmission
• Yuchai Engine Parts