Girth 1349060099 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.

Send email to us

Product Detail

Product Tags

description

Part No: 1349060099
Part name: Girth
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

805801452 JB3616.1-1984 Double steel wire hoop 22-26
276400921 1600×1514×6 screen (standard)
380300646 GR135.10.1-4 copper sleeve
380300652 GR135.12-4 Slider
380901008 GR215A.09-6 Joystick
381600224 PY180-G3 right blade shovel angle change oil cylinder
800107363 58000021B-4 Spring (Meritor)
800307685 Tire 13.00-24TG-TT
800937559 G7J(8VA) Solenoid coil(953)
801138289 53500007HMS4 Oil Seal 80×100×10 Meritor
803013335 Right multi-way valve 200-4-011551020
803166425 JSM-Z10 Lock Female Straight End Fitting G3/8”
803504735 LC1-D32M7C Contactor
803506960 3031734-20 Tachometer
803507286 RG1163M4 Oil level sensor M5×10
805000022 GB/T5783-2000 Bolt M16×25
805000544 GB/T5783-2000 Bolt M14×110
805005272 GB/T5782-2000 Bolt M20×60 10.9
805046512 GB/T5783-2000 Bolt M8×35(Dacromet)
805203192 GB/T6170-2000 Nut M24 10 (Dacromet)
819911370 Flange 82513615 (Meritor)
276100244 LQC80B.1-5 Nut
276100560 LQC80B.5.1.3-8 Liner (eight)
276100852 LQC80C.1-2 Support wheel
276100854 LQC80C.1-3 Large sprocket
276400919 1740×1514×11 Screen (standard)
276403289 LQC160C.2Ⅱ.1.2 Dispatching plate
276800184 XAP240.19.1.2.3-1 Bending plate
276805575 XAP240.19.4Ⅱ.6 inclined guardrail one
276905185 XAP160Ⅱ.7.1.1.2-3 Copper sleeve
380500426 GR165Ⅲ.20.1-1 Front transition block
380700254 GR185.01.1-9 Receiver
380900924 GR215Ⅹ.14-5 Lower hinge shaft

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service