Intake pipe 134909540 XCMG truck crane spare parts

Intake pipe 134909540 XCMG truck crane spare parts Featured Image
  • Intake pipe 134909540 XCMG truck crane spare parts
  • Intake pipe 134909540 XCMG truck crane spare parts

Short Description:

Some of our crane accessories available
LD wheel, wheel set, reel set, hook set, pulley set, coupling, wire rope, cable pulley, running motor, brake, reducer, cable reel, overload limiter, standard parts.
Inverter, remote control, resistor, control panel, explosion-proof motor, explosion-proof electrical appliance, control cable, overload limiter, protection cabinet, explosion-proof limiter, limit switch, rail clamp, current collector.


Product Detail

Product Tags

description

Part No: 134909540
Part name: Intake pipe
Compatible equipment model: 25t truck crane and other xcmg truck cranes
Part brand: XCMG

Due to too many types of spare parts, we cannot display them all on the website. Please feel free to contact us for specific information. The following are some other related product part numbers：

252600511 UPPER ART PIN
252600353 BUSHING
252600572 BUSHING
252600717 BUSHING
252600723 HYDRAULIC TUBE
ZL20-032003 PISTON
ZL20-035002 BUSHING
12159599 CAMSHAFT BUSHING SET X 7
6105Q-1005058A THRUST BEARING SET
F7000-1004005 CONNECTING ROD BEARING SET
615G00060016 THERMOSTHAT
D30-9000100A GASKET KIT
D30-1003001B CYLINDER HEAD GASKET
LN915,12,2-8 VALVE DRIVE CABLE – LOAD & TILT
802138058 WINDSHIELD WIPER MOTOR
490BPG Gaskets Kit
490B-01036 Crankshaft Front Seal
490B-16035 Crankshaft Rear Seal
490B Liner Kit
490B-04200 Connecting Rods
490B-01034-01033 Cranksahft Bearings
490B-04007A Connecting Rod Bearings
JFZ2901Y-A X alternator
801540478 Rear view Mirror
803202620 seal kits
3816000371 BRONZE GUIDE – 31MM
801503840 DOOR LOCK SET
12159770 WATER PUMP
4644 330 849 FLEX DISC
YTR,060100 IDLER GEAR
YTR,060003 CAMSHAFT GEAR
YTR,060005 INJECTION PUMP GEAR
A498B-21000 FUEL INJECTION PUMP
0501 315 338 TRANSMISSION SOLENOID
614 08 0123 PUMP COUPLING CLAMP
75700875419 BRAKE PISTON 50MM
803172436 SEAL
310602112 BUCKET BUSHING
272200526 park brake
272200496 nuts
860135586 seal
203516 control cable
2F0305 control cable

Some common crane accessories product introduction
1. Steel wire rope.
Check that the wire rope specification, model and slip drum match are in accordance with the design requirements. Whether the fixed installation of wire ropes, such as wire rope fixed end clips, rope clip blocks, etc., meets the requirements. Whether the wire rope is worn, broken, kinked, flattened, bent, broken, and corroded.
2. Crane hook
Check whether the crane hook and anti-dropping equipment meet the requirements, whether the hook has cracks, peeling cracks and other defects; whether the hook section is worn, the increase in opening, torsional deformation, and whether it exceeds the standard; the hook neck and surface fatigue deformation and cracks and related Wear of pin bushings.
3. Coupling.
Whether the coupling parts are damaged, the connection is loose, and the running impact phenomenon. Whether the wear of the coupling, pin shaft, shaft pin hole and buffer rubber ring exceeds the standard. Whether the coupling is concentric with the two parts being connected.
4. Reel.
Whether the drum body and drum edge have fatigue cracks, damage, etc.; whether the wear of the rope groove and drum wall exceeds the standard; whether the height of the drum rim matches the number of layers of wire rope winding; whether the working conditions of the rope guide and rope arrangement meet the requirements Require;
5. Braking device.
The setting of the brake, whether the type of the brake meets the design requirements, whether the tie rod and spring of the brake have any defects such as fatigue deformation and cracks; whether the pin shaft, spindle, brake wheel, and brake friction plate are worn beyond the standard, and whether the hydraulic brake leaks oil ; Whether the braking clearance adjustment and braking capacity can meet the requirements.
6. Pulley.
Whether the pulley is equipped with an anti-dropping rope groove device; whether the pulley rope groove and wheel flange have cracks, broken edges, excessive wear, etc., and whether the pulley rotates flexibly.

Welcome to consult us or search on our site for more spare parts！

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

Our warehouse

Our warehouse

Pack and ship

Pack and ship
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories