7N-9650 integrated 90-tooth flywheel assembly CAT spare part

Short Description:

This is Cat integrated 90-tooth flywheel assembly, gray cast iron base with built-in starter ring gear, stores rotational inertia to stabilize engine speed, replace whole unit if teeth broken, cracked or out of balance.


Product Detail

Product Tags

description

Cat 7N-9650 flywheel is an integrated assembly with 90 starter teeth. It mounts to crankshaft rear flange, stores inertia to smooth engine speed fluctuation. The integrated ring gear meshes directly with starter pinion for cranking, rear face connects to clutch or torque converter. It fits legacy Cat industrial diesel engines for compact loaders, power units, generator sets and pump drives, suitable for light duty and frequent start-stop cycles. Aged and dynamically balanced after casting. Different from separate ring gear, its teeth are integrated, replace full assembly when cracked, chipped, scored or unbalanced.

Product Name: Crankshaft Flywheel Assembly (90 teeth integrated)
Part Number: 7N-9650
Teeth: 90
Material: Structural Steel, Gray (Flake) Iron
Process: Integral casting, aging treatment, full assembly dynamic balance test
Accessories: Flywheel bolts, clutch disc and pilot bearing sold separately

Advantages:

1. Integrated structure, gear and flywheel body fixed firmly, no loose risk
2. Good damping property of gray cast iron to stabilize small engine speed
3. Factory dynamic balance for whole assembly, low vibration to protect crankshaft
4. Hardened gear teeth, impact resistant for frequent cranking of compact machines
5. Standard OEM mounting holes, direct assembly replacement, no heat fitting needed
6. Regular spare part for old industrial engines, stable supply for SEA and Africa market

FAQ 

Q: Can the ring gear be removed and replaced separately?
A: No, it is integrated assembly. The whole flywheel must be replaced if gear damaged.

Q: Can flywheel with minor scratches keep working?
A: Light scratches can be polished. Replace if cracked, chipped or out of balance.

Q: What causes engine vibration after installation?
A: Lost balance, excessive runout, deformed crank flange or uneven bolt torque.

Q: Can flywheel bolts be reused?
A: Not recommended. Bolt strength degrades after stretching, new bolts are preferred for overhaul.

our warehouse

our warehouse

Pack and ship

Pack and ship




  • Previous:
  • Next:

  • Write your message here and send it to us