One-piece piston concrete pump spare parts

One-piece piston concrete pump spare parts Featured Image
  • One-piece piston concrete pump spare parts
  • One-piece piston concrete pump spare parts
  • One-piece piston concrete pump spare parts

Short Description:

We can supply most of the Chinese brand one-piece piston, XCMG concrete pump one-piece piston, XCMG 37meters HB37 concrete pump one-piece piston, XCMG Hb39k 39m Truck Mounted Concrete one-piece piston, XCMG Hb41 Hb41A 41m Truck Mounted Concrete Pump one-piece piston, XCMG Hb43k 43m Concrete Pump Truck one-piece piston, Hb46A 46m Truck Mounted Concrete one-piece piston, XCMG Hb48b 48m Truck Mounted Concrete Pump one-piece piston SANY 37m concrete pump one-piece piston, SANY43m concrete pump one-piece piston, SANY52m concrete pump one-piece piston Zoomlion 56X-6RZ 56m concrete pump one-piece piston, Zoomlion 23X-4Z 23m concrete pump one-piece piston etc


Product Detail

Product Tags

one-piece piston

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones

advantage

1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service

Packing  

Carton Boxes, or according to clients’ request.

description

The piston of the pump truck is in direct contact with concrete, it is required to be sealed and wear-resistant. When we find that the water in the tank is muddy or there is concrete, we should realize whether the piston is seriously worn, and we need to check the piston. If the piston is worn, it needs to be replaced in time to avoid straining the concrete cylinder.

When the coating (0.2-0.25mm) of the conveying cylinder is not worn, and concrete mud or sand appears on the back of the concrete piston, that is, the back of the water tank, it indicates that the piston is worn. The concrete seal, guide ring, and dust ring should be replaced immediately.

Since the piston can be returned to the water tank of the pumping system through a simple operation on the control panel, the piston should be removed frequently for inspection. In addition, after the piston is returned to the water tank, the concrete seal and guide ring on the piston should be cleaned and lubricated with lithium-based grease, which can effectively extend the service life of the piston.

Post-maintenance of the concrete piston of the concrete pump accessories

After replacing the new concrete piston, post-maintenance must be carried out

1. Frequently withdraw the piston of the concrete pump fittings, clean and apply lubricating oil;

2. It is found that there is mortar in the washing room, and the concrete piston of the concrete pump accessories should be replaced immediately;

3. Replace the cooling water frequently, clean the washing room and keep it clean;

4. Add enough cooling water, and add hydraulic oil for concrete pump parts as needed to improve lubrication.

Our warehouse

Our warehouse

Pack and ship

Pack and ship
  • Previous:
  • Next:
    • Write your message here and send it to us

    Products categories