PC200-8 Multi‑way Control Valve for Komatsu PC200‑8 20-ton Intelligent Energy-saving Excavator spare parts
description
The PC200‑8 multi-way valve adopts Komatsu’s new-generation integrated compact reinforced valve block structure, equipped with electronically controlled precision spool assembly and upgraded intelligent hydraulic control components, including proportional pressure valves, adaptive flow compensation valves, mute buffer shuttle valves and multi-stage safety relief valves. Different from the purely mechanical regulation of old models, this valve supports electronic signal linkage regulation, realizing active intelligent matching of hydraulic flow and engine power. It effectively solves common problems of traditional valves such as fixed flow output, high idle energy loss and insensitive fine operation. The valve body is integrally cast with high-purity anti-deformation alloy cast iron; the internal spool-sleeve matching pair adopts micro-finish machining and surface anti-wear and anti-corrosion dual treatment, with higher fitting precision and longer service life. All finished products pass factory electronic calibration, full-range flow detection and long-term stable operation tests. Compared with PC200-7 mechanical valves, the PC200-8 electronically controlled valve boasts higher control precision, more flexible power adjustment, lower comprehensive energy consumption and more stable low-speed operation, significantly improving equipment fine-tuning performance and overall fuel-saving effect.
product parameters
Brand: KOMATSU Genuine Original
Model: PC200‑8
Product Name: Electronic Intelligent Load-Sensing Multi-way Main Control Valve Assembly
Applicable Equipment: Komatsu PC200‑8 20-ton Intelligent Energy-saving Excavator
Structural Type: Electronically controlled integrated multi-spool valve, intelligent adaptive load-sensing hydraulic system
Core Structure: Deformed-resistant integral valve body, electronic precision spool assembly, proportional regulation valve group, adaptive flow compensation unit, buffer mute shuttle valve, high-sensitivity electronic pilot channel, precise large-flow oil port, multi-stage pressure safety protection mechanism
Main Material: High-purity anti-fatigue alloy cast iron body, anti-corrosion wear-resistant alloy spool, ultra-precision matching valve sleeve, low-temperature resistant high-pressure sealing parts, original electronic control hydraulic components
Core Function: Full-machine intelligent hydraulic distribution, electronic precise flow regulation, adaptive power matching, multi-stage overload pressure limiting protection, low-speed smooth operation control
Working Characteristics: Intelligent linkage adjustment, precise flow control, low idle loss, stable low-speed operation, low vibration and low noise, excellent long-term working stability
Working Condition Adaptation: Suitable for urban fine leveling, construction aggregate loading, short-cycle earthwork transfer, municipal renovation and long-term stable intermittent operation
Matching Parts: Electronically controlled variable hydraulic main pump, high-precision cylinder assembly, low-noise travel and swing motor, electronic pilot handle valve, anti-aging hydraulic pipeline, intelligent filter and oil tank assembly
advantages
- Adopts exclusive electronic intelligent calibration for PC200-8 models, realizing real-time linkage matching of engine power and hydraulic flow, effectively reducing invalid power loss and improving overall fuel-saving performance.
- Equipped with adaptive flow compensation technology, it automatically adjusts flow output according to different load demands, ensuring smooth and coordinated compound actions with no stuttering or speed fluctuation during fine operation.
- Ultra-precision spool-sleeve matching structure minimizes internal friction and steady-state leakage, maintaining consistent hydraulic accuracy and stable operating efficiency after long-hour continuous work.
- Optimized streamlined internal flow channel reduces hydraulic resistance and flow turbulence, lowering system heat generation and ensuring stable operation in long-term intermittent working conditions.
- Multi-stage gradient pressure protection mechanism buffers sudden load impact, effectively protecting hydraulic execution components and avoiding pressure impact damage in frequent working condition switching.
- Adopts upgraded composite sealing materials with anti-corrosion and anti-aging properties, adapting to complex temperature and humidity environments and permanently avoiding oil seepage and pressure drop failures.
- Original standardized installation interface supports full-position direct replacement without any modification or parameter debugging, greatly improving maintenance efficiency and reducing equipment downtime.
maintenance & replacement tips
- Perform regular overall inspection on valve body sealing surfaces, electronic pilot interfaces and oil port connections to eliminate hidden troubles such as loose connectors and seal aging caused by long-term equipment operation and environmental erosion.
- Follow the official maintenance cycle to replace hydraulic oil and filter elements regularly, preventing tiny impurity particles from wearing precision matching components and affecting electronic flow control accuracy.
- Use original designated high-cleanliness hydraulic oil to avoid oil deterioration and contamination leading to unsmooth spool movement, disordered hydraulic logic and reduced energy-saving efficiency.
- Regularly calibrate and detect pilot signal pressure and main system working pressure to ensure the valve group operates within the intelligent pressure range adapted for PC200-8 models.
- Avoid long-term full-load operation and frequent harsh impact excavation to prevent premature wear and failure of internal intelligent control precision parts.
- When abnormal conditions such as increased fuel consumption, unresponsive fine operation, traveling deviation, obvious internal leakage and continuous system high temperature occur, replace the genuine PC200-8 multi-way valve in time to restore the intelligent hydraulic performance of the whole machine.
warehouse
We have built four spare parts warehouses in Xuzhou, Jining, Kunshan and Changsha to provide customers from all over the world with a variety of high-quality spare parts. We can basically ship self-provided spare parts within three days after confirming the order. If the spare parts need to be adjusted or processed, they will be shipped within 7-30 days.
our warehouse
Pack and ship
- Aerial Boom Lift
- China Dump Truck
- Cold Recycler
- Cone Crusher Liner
- Container Side Lifter
- Dadi Bulldozer Part
- Forklift Sweeper Attachment
- Hbxg Bulldozer Parts
- Howo Engine Parts
- Hyundai Excavator Hydraulic Pump
- Komatsu Bulldozer Parts
- Komatsu Excavator Gear Shaft
- Komatsu Pc300-7 Excavator Hydraulic Pump
- Liugong Bulldozer Parts
- Sany Concrete Pump Spare Parts
- Sany Excavator Spare Parts
- Shacman Engine Parts
- Shantui Bulldozer Clutch Shaft
- Shantui Bulldozer Connecting Shaft Pin
- Shantui Bulldozer Control Flexible Shaft
- Shantui Bulldozer Flexible Shaft
- Shantui Bulldozer Lifting Cylinder Repair Kit
- Shantui Bulldozer Parts
- Shantui Bulldozer Reel Shaft
- Shantui Bulldozer Reverse Gear Shaft
- Shantui Bulldozer Spare Parts
- Shantui Bulldozer Winch Drive Shaft
- Shantui Dozer Bolt
- Shantui Dozer Front Idler
- Shantui Dozer Tilt Cylinder Repair Kit
- Shantui Sd16 Bevel Gear
- Shantui Sd16 Brake Lining
- Shantui Sd16 Door Assembly
- Shantui Sd16 O-Ring
- Shantui Sd16 Track Roller
- Shantui Sd22 Bearing Sleeve
- Shantui Sd22 Friction Disc
- Shantui Sd32 Track Roller
- Sinotruk Engine Parts
- Tow Truck
- Xcmg Bulldozer Parts
- Xcmg Bulldozer Spare Parts
- Xcmg Hydraulic Lock
- Xcmg Transmission
- Yuchai Engine Parts
Write your message here and send it to us
